Flag case, sides made of 15mm walnut, 4mm beech plywood back, 3mm front glass. Overal dimensions aprox. 40×40X60 cm, 65mm thick. Finish non glossy spray laquer, three layers. Splines were made of beech. Laser engraved plastic, selfadhesive memorial plate. -- Ivan, Croatia, Wooddicted | |||||||
|
|
| Author | Latest activity | New comments or replies since you last checked |
||||
|---|---|---|---|---|---|---|
|
Recommended straight bits? |
opticsguy | 05-06-2021 10:06 PM | sign in to get readership tracking | ||
|
|
Off-topic content. Click to see the post. |
woodbutcherbynight | 05-06-2021 10:05 PM | sign in to get readership tracking | ||
|
|
Joining 2- 22 1/2 degree face frame for corner cabinet |
Jake229 | 05-06-2021 10:04 PM | sign in to get readership tracking | ||
|
Installing A DIY A & C Towel Bar |
James E McIntyre | 05-06-2021 10:04 PM | sign in to get readership tracking | ||
|
|
wood turning sharpening angle gauge ,how is it used? |
a1Jim | 05-06-2021 10:02 PM | sign in to get readership tracking | ||
|
|
Handplanes Of Your Dreams, v2.0 - Sharp As Ever |
Bertha | 05-06-2021 09:59 PM | sign in to get readership tracking | ||
|
|
Tales from the cabinet shop/wood shop. |
DS | 05-06-2021 09:50 PM | sign in to get readership tracking | ||
|
|
New Shop - Electrical Thoughts |
WoodZenStudent | 05-06-2021 09:17 PM | sign in to get readership tracking | ||
|
Fastest hand plane in the world! |
mafe | 05-06-2021 09:16 PM | sign in to get readership tracking | ||
|
|
Question about TS Rip Blades |
Joel_B | 05-06-2021 09:14 PM | sign in to get readership tracking | ||
©2021 Verticalscope Inc. All Rights Reserved. | Terms of Service | Copyright | Privacy Policy |
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
9 comments so far
doubleDD
home | projects | blog
10348 posts in 3118 days
#1 posted 03-29-2021 05:25 PM
Good looking flag case Ivan.
-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.
pottz
home | projects | blog
16766 posts in 2060 days
#2 posted 03-29-2021 10:01 PM
nice case ivan,it’s a privilege to make one i feel.
-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
LittleBlackDuck
home | projects | blog
7082 posts in 1896 days
#3 posted 03-29-2021 11:06 PM
Watch it maj... you may get you project flagged!
-- If your first cut is too short... Take the second cut from the longer end... LBD
Eric
home | projects | blog
1353 posts in 948 days
#4 posted 03-29-2021 11:11 PM
Looking good Ivan, you must be getting more orders
-- Eric, building the dream
Jim Jakosh
home | projects | blog
26186 posts in 4181 days
#5 posted 03-30-2021 12:15 AM
Nice work on the flag case, Ivan…..........Cheers, Jim
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
mel52
home | projects | blog
2060 posts in 1340 days
#6 posted 03-30-2021 04:35 AM
Great looking project, I have been needing to make a couple of these. May have to get in gear and just do it. Thanks for showing and a good job doing it. Mel
-- MEL, Kansas
Ivan
home | projects | blog
16785 posts in 3943 days
#7 posted 03-30-2021 04:43 AM
Thanks guys for compliments and kind comments!
-- Ivan, Croatia, Wooddicted
Jeff
home | projects | blog
37 posts in 3592 days
#8 posted 04-03-2021 02:39 AM
Very nice Ivan, I like your work, walnut, a great choice also. Are you in Croatia? Hope all is well there. Stay busy in your shop.
A friend from Iowa, USA
-- Jeff, eastern Iowa
Ivan
home | projects | blog
16785 posts in 3943 days
#9 posted 04-03-2021 05:18 AM
Hi Jeff, thanks! Yey, Croatia…. All ok here… Same issue as everywhere in the world…
-- Ivan, Croatia, Wooddicted
Have your say...