LumberJocks

Tables

  • Advertise with us
Project by angrybeaver10 posted 03-11-2021 11:55 AM 890 views 0 times favorited 8 comments Add to Favorites Watch

Atter two years of remodeling the house and time on my hands because of 2020 these tables kept me busy for a couple of weeks talk about tenons you definitely get proficient at making them. Making 3 tables at the same time was a challenge keep parts seperate. But in the end the results were worth the effort

-- lawrence schaap





8 comments so far

View Bobsboxes's profile

Bobsboxes

1673 posts in 3906 days


#1 posted 03-11-2021 12:57 PM

Great looking tables, nice build.

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View Edwin's profile

Edwin

169 posts in 4240 days


#2 posted 03-11-2021 02:16 PM

very nice…

-- Ed Port Republic

View recycle1943's profile

recycle1943

5850 posts in 2864 days


#3 posted 03-12-2021 10:55 AM

But in the end the results were worth the effort

that is so true – very nice tables

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View angrybeaver10's profile

angrybeaver10

22 posts in 577 days


#4 posted 03-12-2021 11:56 AM

Thanks for the nice comments from all

-- lawrence schaap

View Foghorn's profile

Foghorn

1291 posts in 628 days


#5 posted 03-12-2021 07:10 PM

Well done. Are those cherry?

-- Darrel

View angrybeaver10's profile

angrybeaver10

22 posts in 577 days


#6 posted 03-13-2021 01:10 AM

No they are oak but cherry would have been a great choice also thanks for commenting

-- lawrence schaap

View BiologistAngler's profile

BiologistAngler

36 posts in 992 days


#7 posted 03-31-2021 04:00 AM

They turned out great, well done. What kind of stain did you use?

View angrybeaver10's profile

angrybeaver10

22 posts in 577 days


#8 posted 03-31-2021 12:00 PM

general finish waterbase gel and top coat i dont think ill use that kind of stain (waterbase) for two reasons 1 its really hard to get stain into the grain on oak and 2 on big surfaces ie table tops it dries to fast now their top coat ill never use anything else unless i spray it on the top coat goes on with a patch of cotton cloth two coats and scuff off the the standing grain (lightly) then a couple of more coats no runs or edge build up thanks for the kind words im off to building chairs

-- lawrence schaap

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com