LumberJocks

Handle a silicone flipper with the aid of a Domino Joiner (DF500)

  • Advertise with us
Project by ChuckM posted 03-06-2021 12:55 AM 836 views 0 times favorited 3 comments Add to Favorites Watch

The following steps were followed:
1. Pick color-matching wood
2. Cut a mortise 10mm deep on a handle blank with a DF500 (4mm cutter, set at 20mm depth)
3. Drill and chisel the mortise to final depth (about 35mm )
4. Bandsaw and sand handle to desired shape
5. Sign work
6. Epoxy glue wooden handle to flipper
7. Spray a few coats of polyurethane.

(Here’s a previous project of handling a frying pan using the lamination method: https://www.lumberjocks.com/projects/416139 )

-- The time I enjoy wasting is not time wasted





3 comments so far

View pottz's profile

pottz

16366 posts in 2044 days


#1 posted 03-06-2021 02:44 AM

HMMM what was the purpose?

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View ChuckM's profile

ChuckM

665 posts in 4727 days


#2 posted 03-06-2021 02:48 AM

The handle was a bit short. The wooden piece is added to make the handle longer by about 1-1/2” to a final length of 8-1/2”.

-- The time I enjoy wasting is not time wasted

View pottz's profile

pottz

16366 posts in 2044 days


#3 posted 03-06-2021 03:00 AM



The handle was a bit short. The wooden piece is added to make the handle longer by about 1-1/2” to a final length of 8-1/2”.

- ChuckM


fair enough,and it was made from wood so im good!

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com