LumberJocks

Hanging and Floating Dish Racks, solid surface and stainless steel

  • Advertise with us
Project by Sark posted 02-28-2021 03:21 PM 358 views 0 times favorited 2 comments Add to Favorites Watch

This is the 3rd iteration of this design: First was wood with wood dowels, clear finish. Lasted 10 years but looked horrible. No way to keep it clean. Second was wood frame with stainless dowels. No way to keep white paint from flaking, and I tried several kinds of finish.

So I made a frame from laminated Corian to match the cutting board. Used 1/2” stainless tubes, and drilled holes with a 13mm drill which provides just enough clearance to slide the tubes in. Hot melted the back and front together before drilling, so that all holes line up. Everything glued together with epoxy. The hanger is held in place by a pin.





2 comments so far

View mtnwild's profile

mtnwild

3931 posts in 4579 days


#1 posted 02-28-2021 09:25 PM

Some times wood just isn’t the best material for a certain project.

good idea, well done…

-- mtnwild (Jack), It's not what you see, it's how you see it.

View lightweightladylefty's profile

lightweightladylefty

3615 posts in 4764 days


#2 posted 03-04-2021 07:45 AM

Sark,

What a clever and attractive solution!

L/W

-- “Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin -- Jesus is the ONLY reason for ANY season.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com