| Project by PapaGary | posted 01-23-2021 01:10 PM | 528 views | 0 times favorited | 4 comments |  |
 |
Another model on MyMiniFactory that I couldn’t resist it. I used ZBrush to slice and to fill the hollow parts, however their 2020 upgrade had a problem with the size update, so after making some parts twice, I started using Aspire to adjust the size to scale to fit against the other parts. I applied powdered Bronze metal coating. Since my plans were to coat it, I just used a 2×10 and a 4×8 Douglas fir which gave me better strength than using MDF. Size is 21”L x 14”H.
Gary
4 comments so far
Jim Jakosh
home | projects | blog
25937 posts in 4117 days
#1 posted 01-25-2021 06:19 PM
Great detail in that piece, Gary!. I like how the finish turned out for the bronze!!
Cheers, Jim
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
mel52
home | projects | blog
1981 posts in 1276 days
#2 posted 01-26-2021 02:12 AM
I really have no idea on what you are saying on most of it. But, it is a good looking project with all the detail and color. Great job !!! Mel
-- MEL, Kansas
awsum55
home | projects | blog
894 posts in 1520 days
#3 posted 01-26-2021 10:40 PM
Did you design that? Was it carved? Very interesting piece, but not sure what it is or how you did it. Either way I think it’s very cool.
-- John D, OP, KS
Angelo13
home | projects | blog
22 posts in 110 days
#4 posted 01-27-2021 11:13 PM
that is amazing looking..would like more info on how that was actually made.
-- oops, I just learned something.
Have your say...