New Favorite Push block

  • Advertise with us
Project by Dpadg posted 01-17-2021 01:50 AM 722 views 1 time favorited 4 comments Add to Favorites Watch

This push block took a bit longer to complete than I would care to admit for a push block but it was definitely worth it. It is made out of 2 pieces of 3/4” ply laminated together. I got the design from a wood smith article (, however after all the effort it took to make the thing, I decided to add on a replaceable sole out of 1/4” hard board that its attach with double face tape that after the bottom becomes too cut up it can be removed and replaced. The bolt on the back is ran through a threaded insert and allows the hardboard heel to be slid up and down to adjust for stock of varying thickness. I rounded over all the edges with my router and then finished it off with a course rasp to shape it a bit more comfortably.

4 comments so far

View mike02719's profile


291 posts in 4794 days

#1 posted 01-17-2021 01:45 PM

Pretty cool piece. I think I will do the same.

-- Mike, Massachusetts

View swirt's profile


6008 posts in 3980 days

#2 posted 01-17-2021 03:14 PM

Very clever design.

-- Galootish log blog,

View splintergroup's profile (online now)


4671 posts in 2231 days

#3 posted 01-17-2021 03:52 PM

Great feature having the consumables easily replaced. I shred these items up as they get used all the time.

View NCTurner's profile


61 posts in 2165 days

#4 posted 01-20-2021 05:49 PM

I like it, good job! I need to do something like this as well.

-- One good turn deserves another!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics