| Project by sapwood | posted 11-24-2020 05:12 PM | 546 views | 0 times favorited | 3 comments |  |
 |
My first try at the 3D cutting board. Found some great instructions through this site (thanks my fellow posters!). As all have stated previously, accuracy of the cuts and angles is critical to avoid gaps. Mine is far from perfect, but I am pleased with the results. Main field is cherry, walnut, hard maple. Bloodwood and bubinga(?) binding. Soaked in mineral oil, then finished with 8:1 mix mineral oil/bees wax.
3 comments so far
Ivan
home | projects | blog
16526 posts in 3842 days
#1 posted 11-24-2020 07:28 PM
This one is real ’’blast’’!!
-- Ivan, Croatia, Wooddicted
Jim Jakosh
home | projects | blog
25750 posts in 4080 days
#2 posted 11-24-2020 08:11 PM
That came out really nice in 3D!!
Cheers, JIm
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
therealSteveN
home | projects | blog
7009 posts in 1549 days
#3 posted 11-24-2020 08:21 PM
Nice looking board.
-- Think safe, be safe
Have your say...