Project Information
....feel like Gerard Buttler….Huge order for some 150 salt & paper sets, 5cm diameter, 8cm height, ash, finish wood oil and spray laquer non glossy (only outside). Corks - conus shape 20-24mm radius.
Process :
- cut rods to 8cm lenght on mitersaw
- round top side on router table with 3mm radius bit
- drill 2.5mm - 1 hole for paper, 2mm - 5 holes for salt on top
- drill 22mm thru hole at the back
- turn larger hole 45mm radius 15mm deep on lathe with chiesels
- sand inner wide surface and bottom edges with sandpaper
- wood oil
- spray laquer
Process :
- cut rods to 8cm lenght on mitersaw
- round top side on router table with 3mm radius bit
- drill 2.5mm - 1 hole for paper, 2mm - 5 holes for salt on top
- drill 22mm thru hole at the back
- turn larger hole 45mm radius 15mm deep on lathe with chiesels
- sand inner wide surface and bottom edges with sandpaper
- wood oil
- spray laquer