Kitchen Table

  • Advertise with us
Project by JFred posted 11-21-2020 12:03 PM 313 views 0 times favorited 4 comments Add to Favorites Watch

This Table was brought to me, it was stored in a barn and was the height of a card table.
So I raised the legs 3 inches, repaired one of the claw foot and painted them matte black.
The table needed an extension added ( for more seating ) and extension sliders added also.
Never tried table extensions before, I ran into a small problem but was able to contact Rockler
and they helped me figure out my problem.
Finished with 5 coats of polycrylic

4 comments so far

View WoodMac56's profile


23 posts in 1344 days

#1 posted 11-21-2020 01:40 PM

Nice. How did you add 3” to the legs?

View JFred's profile


225 posts in 2461 days

#2 posted 11-21-2020 02:06 PM

WoodMac The top of the leg was square, lucky me.
First I glued and clamped 3×3 blocks on top to hold them square, 4 on each leg … then I screwed them together alternating screws in the corners

View BurlyBob's profile


8016 posts in 3181 days

#3 posted 11-22-2020 12:52 AM

That is a really nice table.

View JFred's profile


225 posts in 2461 days

#4 posted 11-22-2020 08:06 AM

Thanks Bob

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics