LumberJocks

Miter spline sled

  • Advertise with us
Project by Randy posted 11-05-2020 01:36 AM 1377 views 8 times favorited 28 comments Add to Favorites Watch
Miter spline sled
Miter spline sled No picture No picture No picture No picture No picture
Zoom Pictures

I made this miter spline sled for cutting splines on boxes. I think it will work well on picture frames but have not used it in that way thus far.

https://youtube.com/channel/UCSyk1Df3CdsHEBKX1KlCnjw

-- RKWoods





28 comments so far

View MrWolfe's profile

MrWolfe

1531 posts in 1184 days


#1 posted 11-05-2020 01:52 AM

Looks great Randy.
Can’t wait to see the boxes you make with it.
Jon

View Randy's profile

Randy

395 posts in 4508 days


#2 posted 11-05-2020 02:36 AM

Thank you Jon.

-- RKWoods

View LittleBlackDuck's profile

LittleBlackDuck

6974 posts in 1882 days


#3 posted 11-05-2020 04:55 AM

Neat jig Randy... Hope the runners and kerf are not central… you might be able to flip the jig 180° for a different kerfed blade (1/4” perhaps).

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Randy's profile

Randy

395 posts in 4508 days


#4 posted 11-05-2020 10:42 AM

That’s a great idea, the more versatile a jig, the better.

-- RKWoods

View CiscoKid's profile

CiscoKid

359 posts in 3934 days


#5 posted 11-05-2020 11:34 AM

Nice looking sled. I particularly like the stop.

-- Al, Culpeper VA

View Randy's profile

Randy

395 posts in 4508 days


#6 posted 11-05-2020 12:16 PM

Thank you Al, the stop definitely comes in handy!

-- RKWoods

View pottz's profile

pottz

16375 posts in 2045 days


#7 posted 11-05-2020 03:12 PM

thats a great sled randy and i say that because it’s very similar too the one i made-lol. ive used mine for boxes and a lot for frames.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View bugradx2's profile

bugradx2

295 posts in 1080 days


#8 posted 11-05-2020 03:40 PM

That’s cool!

-- The only thing not measured in my shop is time

View LittleBlackDuck's profile

LittleBlackDuck

6974 posts in 1882 days


#9 posted 11-05-2020 07:29 PM

I appologise R, my attempt at humour has once again back fired….

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Randy's profile

Randy

395 posts in 4508 days


#10 posted 11-05-2020 07:51 PM

I think Pottz was just saying his jig is similar and he finds the design useful. Sorry, i don’t really understand the comment.

-- RKWoods

View LittleBlackDuck's profile

LittleBlackDuck

6974 posts in 1882 days


#11 posted 11-05-2020 08:10 PM



I think Pottz was just saying his jig is similar and he finds the design useful. Sorry, i don’t really understand the comment.

- Randy


Appologies.. have corrected my comment.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Oldtool's profile

Oldtool

3209 posts in 3251 days


#12 posted 11-05-2020 08:25 PM

Nice, should prove to be very useful.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View Randy's profile

Randy

395 posts in 4508 days


#13 posted 11-05-2020 08:30 PM

No problem, I think I missed something, wasn’t trying to call you out.

-- RKWoods

View LittleBlackDuck's profile

LittleBlackDuck

6974 posts in 1882 days


#14 posted 11-05-2020 08:51 PM



No problem, I think I missed something, wasn’t trying to call you out.
- Randy

That’s cool, I need to be pulled up by more than just Cricket. I try to make comments other than the basic generic ”nice job”... sometimes it works and sometimes the vino gets the better of my clear thinking. I should never be taken seriously (unless I talk Fe$tool)... but when I transgress, others may not understand my lunacy (many LJ members will attest to that… here I go again, apologising, sorry to ALL, you included… until my next time).

-- If your first cut is too short... Take the second cut from the longer end... LBD

View pottz's profile

pottz

16375 posts in 2045 days


#15 posted 11-05-2020 09:02 PM

duckie i think you need to start a thread just for making your apologies,would definitely shrink the threads you post on. ;-)

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

showing 1 through 15 of 28 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com