LumberJocks

Clamp Cart

  • Advertise with us
Project by Mrphiltx posted 11-04-2020 08:03 PM 1173 views 1 time favorited 3 comments Add to Favorites Watch

Made a rolling clamp cart for my clamps. Rolls ok, and is short enough to fit under the end of my table saw. Drawer opens either direction, and I’ve rubbed some dark walnut danish oil on it just for fun since I took these pictures. The top has paste wax, everything else is just sanded. I like how the bar clamps are really organized with those slots. With the wheels on the outside, I have hung a few small squeeze clamps on the outside.

Made using scrap plywood a friend gave me. I did have to buy the wheels tho.

It works ok, but the bar clamps fall off more easily than I’d like. I adjusted the top shelf thing for the bar clamps so that it tipped up more and that helped. My best idea for fixing that problem would be to add a second panel in the middle, and slope both panels out at the bottom, instead of one vertical panel.





3 comments so far

View PaxJen's profile

PaxJen

210 posts in 1894 days


#1 posted 11-05-2020 02:29 PM

Nicely organized. Well done.

-- Pax - Maryland

View Rick  Dennington's profile

Rick Dennington

7170 posts in 4432 days


#2 posted 11-05-2020 05:21 PM

That should do the job. Keeps all the clamps together and in one place. Nothing like keeping things together.

-- " There's a better way.....find it"...... Thomas Edison.

View Bstrom's profile

Bstrom

360 posts in 411 days


#3 posted 11-05-2020 05:56 PM

Your clamps are living ‘in high cotton’! Well done…

-- Bstrom

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com