Laser Projects..

  • Advertise with us
Project by jbschutz posted 11-04-2020 03:44 AM 692 views 0 times favorited 1 comment Add to Favorites Watch

My son decided he needed a laser engraver and today, we got to play with it. I was amazed by the quality and size of the machine. I thought it couldn’t possibly do as well as it did. The LaserPecker Pro cost in the $450 range and came with everything needed to get right at it, We tested it on an assortment of materials, including one of my hand carved cherry palm crosses, and the leather bottom on a bowl I had turned on my lathe.
Images were uploaded via blue tooth from an Iphone. It took about 2-3 minutes to engrave each of these two items.
I am impressed with the quality of the result and the fit and finish of the machine.

-- jbschutz

1 comment so far

View LittleBlackDuck's profile


6478 posts in 1826 days

#1 posted 11-05-2020 03:02 AM

You have opened up a can of worms… You’ll be pleasantly surprised at the quality and scope of the results…

Just hope your son doesn’t change his needed one mind. Years ago I was looking at some cheap lasers and when I discovered what they could do, I upped the ante with intention of helping my daughter set up a business… One week after I signed the cheque and took delivery, she lost interest. Not wanting to go comecial, I now have a monstrously expensive hobby laser… puts my Fe$tool fetish into insignificance.

-- If your first cut is too short... Take the second cut from the longer end... LBD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics