Mirror stand

  • Advertise with us
Project by Bernard58 posted 10-26-2020 09:04 AM 691 views 1 time favorited 1 comment Add to Favorites Watch

Needed a stand for this mirror. Mirror is 60×90 cm and made of oak. Stand is 125 cm high, made of acacia wood (didn’t have oak available, but acacia is quite similar in color, perhaps a little more yellowish). Mirror can be rotated along two bolts that are glued into two small block using epoxy, and then screwed onto the mirror (didn’t want to drill large holes into the mirror). The mirror can be fixed into position using two 5 cm diameter knobs made from padauk, into which a nut was glued with epoxy. The castor wheels make it easily moveable.

-- Bernard Delaey, Belgium -

1 comment so far

View Jim Jakosh's profile

Jim Jakosh

27012 posts in 4396 days

#1 posted 10-26-2020 06:13 PM

Nice work on the mirror, Bernard!!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics