LumberJocks

Carved Cherry Bowl

  • Advertise with us
Project by TheDane posted 10-15-2020 02:34 AM 983 views 1 time favorited 9 comments Add to Favorites Watch

Cherry Bowl – 7-1/2” in diameter, 3-1/4” high. Carving done with a WeCheer reciprocating handpiece on a Dremel rotary tool.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"





9 comments so far

View therealSteveN's profile (online now)

therealSteveN

8263 posts in 1738 days


#1 posted 10-15-2020 04:18 AM

Nice bowl, looks like a lot of layout to keep it straight lined. Ima thinking you have quite the handle on this type of work.

Had to look up a WeCheer handpiece, is it working in a punching motion like a chisel, or a sawing motion across the work? I spent some time at U tube, and saw several vids of guys using one to scoop out wood with curved chisels, most of that was pretty rough to watch. Didn’t see anything with checkering like you have here, much less an organized pattern of any type.

-- Think safe, be safe

View lightweightladylefty's profile

lightweightladylefty

3658 posts in 4877 days


#2 posted 10-15-2020 05:22 AM

A really attractive bowl!

L/W

-- “Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin -- Jesus is the ONLY reason for ANY season.

View TheDane's profile

TheDane

5987 posts in 4827 days


#3 posted 10-15-2020 01:29 PM

... is it working in a punching motion like a chisel, or a sawing motion across the work?

It is reciprocal … sort of like a woodpecker. This handpiece came with 5 chisels, a wrench, and an adapter to mate it with the Dremel tool. I got it from Treeline USA ( https://treelineusa.com/reciprocating-handpiece-for-dremel/ ).

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View LesB's profile

LesB

3031 posts in 4607 days


#4 posted 10-15-2020 05:23 PM

Well done ….
but darn, now there is another tool I need to get. I try putting on my Xmas list first.

-- Les B, Oregon

View TheDane's profile

TheDane

5987 posts in 4827 days


#5 posted 10-15-2020 09:30 PM

... but darn, now there is another tool I need to get. I try putting on my Xmas list first.

You know the old saying … ”He who dies with the most tools wins.”

Seriously, that handpiece and the 5 chisels that come with it are worth every penny. Just make sure it is compatible with your Dremel tool.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View Jim Jakosh's profile

Jim Jakosh

26470 posts in 4270 days


#6 posted 10-15-2020 10:54 PM

Beautiful work on that bowl,Gerry!!!!!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View jeff's profile

jeff

1322 posts in 4629 days


#7 posted 10-16-2020 12:29 AM

Nice work.

-- Jeff,Tucson,Az.

View John's profile (online now)

John

2089 posts in 2434 days


#8 posted 10-16-2020 06:23 PM

Good looking bowl Gerry! Must have taken a bit to get all that done.

-- John, Sunshine Coast, BC, Canada.

View TheDane's profile

TheDane

5987 posts in 4827 days


#9 posted 10-16-2020 10:57 PM

Good looking bowl Gerry! Must have taken a bit to get all that done.

- John

It wasn’t that bad. My lathe’s indexing system made sketching the matrix pretty easy, and the WeCheer handpiece and chisel are fun to use. The hardest part of this project was the sanding … I made the mistake of using some really inferior sanding mesh that left scratches that were hard to get out. I should have used Abranet and started with 180 or 240 … live and learn.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com