LumberJocks

Oak Fly Box

  • Advertise with us
Project by Charlie81 posted 10-02-2020 11:04 PM 685 views 0 times favorited 6 comments Add to Favorites Watch
Oak Fly Box
Oak Fly Box No picture No picture No picture No picture No picture
Zoom Pictures

This fly box is made from Oak and is 5”x7”x1.25” since I tie fly’s I need boxes for them so I started building them.
I use mostly wood that I around the shop. It is fun and useful.

-- Charlie J81





6 comments so far

View Jim Jakosh's profile

Jim Jakosh

25485 posts in 4027 days


#1 posted 10-03-2020 03:12 AM

Cool fly box!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View pottz's profile

pottz

12429 posts in 1906 days


#2 posted 10-03-2020 03:53 AM

as a fly fisherman cool yeah but we need more pic’s man,and welcome to wood heaven.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View Andre's profile

Andre

3856 posts in 2728 days


#3 posted 10-03-2020 03:57 AM

Yep they are fun to make, this is one I made for my Granddaughter, Looking at yours perhaps I need to make some more? I laser engraved her initial on the front after taking the Pic’s.

-- Lifting one end of the plank.

View EllenWoodHead's profile

EllenWoodHead

121 posts in 298 days


#4 posted 10-03-2020 05:11 AM

“Waiter, there is a fly in my soup.”
“There can’t be, we used them all in the raisin bread.”

Little boxes are fun. I like your box, the one-piece lid and the nice old oak. Simple and attractive.

-- "wood" and "good" rhyme, but not "food"

View Charlie81's profile

Charlie81

10 posts in 64 days


#5 posted 10-03-2020 07:16 PM

Andre :
I like your box, what did you use on the inside? I am still having trouble cutting mortises for my hinges. Have you got any suggestions.

-- Charlie J81

View Andre's profile

Andre

3856 posts in 2728 days


#6 posted 10-04-2020 05:34 AM

The foam was from Lee Valley, supposed to be layered 1/4” for packing tools. Got to old and does not separate very well anymore.
The hinge mortises were cut very carefully with a chisel, for a change they actually turned out not to bad:)

-- Lifting one end of the plank.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com