LumberJocks

Roughsawn Shaker Pine Wall Cabinet

  • Advertise with us
Project by Bstrom posted 09-24-2020 11:04 PM 464 views 0 times favorited 7 comments Add to Favorites Watch
Roughsawn Shaker Pine Wall Cabinet
Roughsawn Shaker Pine Wall Cabinet No picture No picture No picture No picture No picture
Zoom Pictures

Bought some very pretty, circular cut roughsawn Pine and hated to plane off the velvety detailed surface. So, I used a Shaker cabinet design too create a very rustic piece that accepts the lack of cabinetry skills I have. Hand planed the bevel on the milled inset panel to add some contrast. The interior is also all planed for a finished look. Need to make more of this one..

-- Bstrom





7 comments so far

View recycle1943's profile

recycle1943

4794 posts in 2505 days


#1 posted 09-24-2020 11:10 PM

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Eric's profile

Eric

552 posts in 756 days


#2 posted 09-25-2020 12:30 AM

Looks very nice, great job

-- Eric, building the dream

View JCamp's profile

JCamp

1229 posts in 1433 days


#3 posted 09-25-2020 08:04 AM

Looks good to me. A set of those would look really nice in a cabin

-- Whatsoever thy hand findeth to do, do it with all thy might

View grovemadman's profile

grovemadman

724 posts in 4654 days


#4 posted 09-25-2020 01:53 PM

I think you are selling yourself short on this piece. It looks great!

-- "It is the job of the woodworker to hide his mistakes and keep a tight set of lips about them!"--Chuck

View Bstrom's profile

Bstrom

134 posts in 56 days


#5 posted 09-25-2020 02:02 PM



I think you are selling yourself short on this piece. It looks great!

- grovemadman


It was a first cabinet job and I can’t brag much on it – the roughsawn nature helps hide many flaws. The next one will be much better fitted together and honor the original Shaker design much more. Thanks for the encouragement!

-- Bstrom

View therealSteveN's profile (online now)

therealSteveN

6454 posts in 1457 days


#6 posted 09-25-2020 02:53 PM

The only thing I note looking dead at it I wouldn’t do is, you have a reveal at the bottom of the face frame on both sides. Then you flare the tops. I would get rid of the reveal, unless it extended top to bottom. Only part way it suggests it’s crooked. Beyond that rough sawn is a feature of a rustic piece. If you don’t want rustic, plane it smooth, at that time you want to closely match the stock so all the individual pieces flow. The casework itself is much better than most people see on a first piece. Considering the flare, much better than many see after quite a bit of work.

-- Think safe, be safe

View adam502's profile

adam502

32 posts in 2808 days


#7 posted 09-25-2020 03:20 PM

Looks great!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com