LumberJocks

Pine and Walnut Inlay Slab Clock

  • Advertise with us
Project by GregMorgan posted 09-20-2020 11:49 AM 473 views 0 times favorited 6 comments Add to Favorites Watch

Had a pine slab laying around that was pretty rough (but free). I’ve wanted to try to make a clock for a while so figured this was a good opportunity. The inlays are walnut and also serve to stabilize the cracks and checks. I did the inlay work with a shaper origin. The finish is butcher block oil and wax. The lighting is different in some of the pictures so it looks lighter or darker depending on the lighting.

-- Greg, Allentown, PA





6 comments so far

View woodbutcherbynight's profile

woodbutcherbynight

6297 posts in 3292 days


#1 posted 09-21-2020 02:03 AM

Beautiful work. Check out the Shaper Origin thread here https://www.lumberjocks.com/topics/311241

Perhaps you can add some to the comments as you have used it for a project.

-- Live to tell the stories, they sound better that way.

View swirt's profile

swirt

5573 posts in 3855 days


#2 posted 09-21-2020 02:13 AM

Great work capturing the opposing branches. Nice work on the inlay too.

-- Galootish log blog, http://www.timberframe-tools.com

View mel52's profile

mel52

1704 posts in 1148 days


#3 posted 09-21-2020 02:59 AM

Nice looking clock and a good job using the numbers to bridge the cracks. Mel

-- MEL, Kansas

View GregMorgan's profile

GregMorgan

95 posts in 988 days


#4 posted 09-21-2020 10:41 PM

Thanks!


Great work capturing the opposing branches. Nice work on the inlay too.

- swirt


-- Greg, Allentown, PA

View GregMorgan's profile

GregMorgan

95 posts in 988 days


#5 posted 09-21-2020 10:42 PM

Thanks!


Nice looking clock and a good job using the numbers to bridge the cracks. Mel

- mel52


-- Greg, Allentown, PA

View GregMorgan's profile

GregMorgan

95 posts in 988 days


#6 posted 09-21-2020 10:45 PM

Thanks. I’ll check it out.


Beautiful work. Check out the Shaper Origin thread here https://www.lumberjocks.com/topics/311241

Perhaps you can add some to the comments as you have used it for a project.

- woodbutcherbynight


-- Greg, Allentown, PA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com