LumberJocks

White oak mirror with stained glass

  • Advertise with us
Project by VikingWay posted 09-01-2020 05:20 PM 506 views 0 times favorited 4 comments Add to Favorites Watch

This was my first attempt at finishing white oak and my execution should have been better but i rushed it and it clearly shows i did not meet expectations. I should have made specific complete finish examples for all stains i used. I expected to get a similar outcome from different stains and the outcome was not consistent. I will take my time and have more patience next time.

I tried to back lit the stained glass with a homemade led light panel, but it got so hot i thought i might burn down the house so i removed it. Any suggestions here would be greatly appreciated.

This was also my first attempt at Greene and Greene highlights. So I did learn or start to learn some new skills. Used a 1/4 inch shank spiral down cut router bit to cut the highlights which turned out much easier to use and with no blow out. I will use this technic again. I would strongly recommend Darrell Pert’s book and video on Greene and Greene design as i learned a great deal and different skills from each. Great resources.

-- Keith from NC





4 comments so far

View Jim Jakosh's profile

Jim Jakosh

25312 posts in 3987 days


#1 posted 09-01-2020 06:46 PM

Nice cabinet. It looks just fine to me!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View swirt's profile

swirt

5564 posts in 3853 days


#2 posted 09-02-2020 01:56 AM

I like it. Nice work. Sideways cat is funny too.

-- Galootish log blog, http://www.timberframe-tools.com

View htl's profile

htl

5262 posts in 2041 days


#3 posted 09-02-2020 04:42 AM

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View Peteybadboy's profile

Peteybadboy

2324 posts in 2831 days


#4 posted 09-02-2020 10:18 AM

VikingWay you have been busy. Nicely done. Friendly help, if you want your pictures up right just “crop” them a little on your pc first. I don’t how that works but it does.

-- Petey

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com