LumberJocks

MAGNET BOARD

  • Advertise with us
Project by Ivan posted 08-31-2020 06:46 AM 578 views 0 times favorited 9 comments Add to Favorites Watch

Magnet board 1×1m. At the back 10mm birch plywood, front metal sheet 0.7mm, glued with double side stick tape. 45×20mm firwood frame with pyrography sign on top (...’‘our travels’’...). At the back, strengthened corners with 4mm beech plywood.

-- Ivan, Croatia, Wooddicted





9 comments so far

View LittleBlackDuck's profile

LittleBlackDuck

6472 posts in 1825 days


#1 posted 08-31-2020 08:18 AM

Better than approx., however, not clear on the size maj... is that first 1 in mm, cm or m? If it was in mm you’d have a very skinny board.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Ivan's profile

Ivan

16600 posts in 3872 days


#2 posted 08-31-2020 08:25 AM

What is not clear Duck 1×1 m ???

-- Ivan, Croatia, Wooddicted

View LittleBlackDuck's profile

LittleBlackDuck

6472 posts in 1825 days


#3 posted 08-31-2020 09:10 AM

Is it….

  1. 1mm x 1m?
  2. 1cm x 1 m?
  3. 1m x 1m?
  4. 1km x 1 m?

Some of us are not clever.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Ivan's profile

Ivan

16600 posts in 3872 days


#4 posted 08-31-2020 09:28 AM

...Hahahaha…I will follow your way of writing measures…General rule is never mix measures. You can’t put 30cm x 2m , for example. You can put either 30×200cm or 0.3×2m….that’s the way I think…

-- Ivan, Croatia, Wooddicted

View doubleDD's profile

doubleDD

10122 posts in 3048 days


#5 posted 08-31-2020 01:20 PM

Cleaver project Ivan.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Jim Jakosh's profile

Jim Jakosh

25905 posts in 4110 days


#6 posted 08-31-2020 01:30 PM

Nice useful project, Ivan!
The company I worked for sold commercial marker boards for offices and we started out using porcelain coated steel. It was a very good surface for dry erase markers and you could also put anything with a magnet behind it on it. I was able to get seconds from Employee sales to make marker boards out of it.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View GR8HUNTER's profile

GR8HUNTER

8302 posts in 1717 days


#7 posted 08-31-2020 02:14 PM

dont worry about that Duck GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View LittleBlackDuck's profile

LittleBlackDuck

6472 posts in 1825 days


#8 posted 08-31-2020 03:36 PM


...Hahahaha…I will follow your way of writing measures…General rule is never mix measures. You can t put 30cm x 2m , for example. You can put either 30×200cm or 0.3×2m….that s the way I think…
- Ivan

Just gaging maj, had to write something other than just writing Great job...

However, just between us boys,

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Ivan's profile

Ivan

16600 posts in 3872 days


#9 posted 08-31-2020 04:15 PM

LBD….you naughty boy….dirty mind!!...but I like it

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com