LumberJocks

Lamp base

  • Advertise with us
Project by Moosesman posted 08-11-2020 11:15 PM 338 views 0 times favorited 3 comments Add to Favorites Watch

My wife wanted a couple lamps to go with the nightstands I made. I made this one on the tablesaw with a circle jig and then glued it all together and shaped it with files and sanders. I really like the way it turned out. The last picture is From an old Lamp we had. I just took out the wiring and shade and put it on to see how it looked.

-- Cut it chop it rip it....make it!!!!





3 comments so far

View MrWolfe's profile

MrWolfe

1067 posts in 975 days


#1 posted 08-12-2020 02:05 AM

Very cool!
Interesting technique and i like all the hand work.
Thanks for sharing.
Jon

View  woodshaver Tony C   's profile

woodshaver Tony C

7635 posts in 4205 days


#2 posted 08-12-2020 11:39 AM

All that hand work was well worth it! Your lamp’s look super nice!

-- St Augustine FL, Experience is the sum of our mistakes!

View hockeyfan_019's profile

hockeyfan_019

43 posts in 84 days


#3 posted 08-12-2020 12:49 PM

From the grain looks like either oak or ash, so all that end grain would have been a real pain to prevent tearout with a lathe unless you were continuously resharpening (or at least you need more skill than I have). Great idea to use the table saw, turned out great.

-- Most of my tools are older than I am

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com