LumberJocks

Knife block in Cherry

  • Advertise with us
Project by Rwolinski posted 08-09-2020 09:38 PM 425 views 1 time favorited 4 comments Add to Favorites Watch

Needed a knife block to go with a gift knife set. I had some 4/4 Cherry that was rough sawn in the shop about 12” wide and 40” long.
All hand tools on this project.
Flattened and squared with hand planes. Saw work by hand. Rabbeting block planes and shoulder planes for the grooves.
All flattening and joining with planes and chisels in some corners.

-- What I make is for others....How I make it is for me.





4 comments so far

View therealSteveN's profile

therealSteveN

6276 posts in 1427 days


#1 posted 08-10-2020 04:25 PM

Nice block. Am I correct in thinking the back side is a cookbook holder?

Not seeing it populated I’m having trouble dreaming of what goes into the 2 larger holes?

It’s cool you used all hand tools.

-- Think safe, be safe

View Rwolinski's profile

Rwolinski

155 posts in 1178 days


#2 posted 08-10-2020 05:41 PM

Yes Sorry all. Back ledge is for a cookbook or maybe a tablet. The top square hole is for the sharpening steel and the bottom oblong hole is for kitchen shears

-- What I make is for others....How I make it is for me.

View mel52's profile

mel52

1653 posts in 1117 days


#3 posted 08-11-2020 12:27 AM

Good looking project and all by hand tools makes it even better. Good job !!! Mel

-- MEL, Kansas

View BurlyBob's profile

BurlyBob

7852 posts in 3118 days


#4 posted 08-11-2020 12:39 AM

I really like it.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com