Finally added an extension to my Delta 36-725

  • Advertise with us
Project by BFamous posted 07-18-2020 01:15 PM 956 views 0 times favorited 1 comment Add to Favorites Watch
Finally added an extension to my Delta 36-725
Finally added an extension to my Delta 36-725 No picture No picture No picture No picture No picture
Zoom Pictures

It took me a few years to get to this project, and it took me a few months to finish it once I actually started. But I finally added a small extension to my table saw. This is just phase 1 as I want to add a folding section as well, but even this 6” extension provides a lot of benefit for cutting longer pieces.

I have a few more pics, and a little bit of cor commentary on my site about how this was built and attached:

-- Brian Famous :: Charlotte, NC ::

1 comment so far

View Jim Jakosh's profile

Jim Jakosh

27674 posts in 4555 days

#1 posted 07-19-2020 04:30 PM

Hi Brain nice start to full table extension. I have a small shop and had a real bad need for an extension table some years ago and devised the one below so I can flip it up quickly and have a support system that is easy to engage and disengage so I came up with this one:

I have the round part of the support split in half and when I put them together, the piece of PVC slides over them to hold the connection. It works really slick. There is an adjustment screw to get it at the right height, too.

cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics