LumberJocks

BUSINESS CARDS HOLDERS

  • Advertise with us
Project by Ivan posted 07-18-2020 07:27 AM 616 views 0 times favorited 16 comments Add to Favorites Watch

100PIECES DONE!...10×3x2cm beech. 5mm deep, 5 degree angle groove – made on bandsaw with simple ’’2 minute’’ jig.
No finish

-- Ivan, Croatia, Wooddicted





16 comments so far

View LittleBlackDuck's profile

LittleBlackDuck

5954 posts in 1734 days


#1 posted 07-18-2020 08:03 AM

Hey maj, you’re supposed to put many business cards in 1 holder and not many holders into 1 business card.

I started counting them to keep you honest, but ran out of fingers.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Ivan's profile

Ivan

16393 posts in 3781 days


#2 posted 07-18-2020 08:05 AM

LBD… 100

-- Ivan, Croatia, Wooddicted

View Jim Jakosh's profile

Jim Jakosh

25479 posts in 4019 days


#3 posted 07-18-2020 12:24 PM

Nice going, Ivan. There are enough there for the everyone working at the bank !

cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View GR8HUNTER's profile

GR8HUNTER

8036 posts in 1626 days


#4 posted 07-18-2020 02:04 PM

MUST Be a very small kerf band saw blade 100 in 2 minutes thats production GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View Ivan's profile

Ivan

16393 posts in 3781 days


#5 posted 07-18-2020 02:07 PM

Gr8hinter… I made jig in 2 minutes

-- Ivan, Croatia, Wooddicted

View GR8HUNTER's profile

GR8HUNTER

8036 posts in 1626 days


#6 posted 07-18-2020 02:35 PM

sorry i miss read it :<((

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View splintergroup's profile

splintergroup

4121 posts in 2136 days


#7 posted 07-18-2020 02:53 PM

Can get much simpler than that!
Nice production run 8^)

View Madmark2's profile (online now)

Madmark2

1813 posts in 1502 days


#8 posted 07-18-2020 03:16 PM

101, two stacks of 5×10 and the prototype.

-- The hump with the stump and the pump!

View Ivan's profile

Ivan

16393 posts in 3781 days


#9 posted 07-18-2020 03:25 PM

Madmark there is one hidden example with grooves on two sides… so it is definately 100

-- Ivan, Croatia, Wooddicted

View FrenchGoattoys's profile

FrenchGoattoys

107 posts in 664 days


#10 posted 07-18-2020 11:36 PM



Hey maj, you re supposed to put many business cards in 1 holder and not many holders into 1 business card.

I started counting them to keep you honest, but ran out of fingers.

Ha, ha, ha, LBD. Good one. Ivan, you are cranking out the projects.

- LittleBlackDuck


-- KJ, Spokane, WA.: Don’t count the days; make the days count.

View FrenchGoattoys's profile

FrenchGoattoys

107 posts in 664 days


#11 posted 07-18-2020 11:39 PM

Ha,ha,ha, LBD. Good one. Ivan, you are busting out the projects.

-- KJ, Spokane, WA.: Don’t count the days; make the days count.

View LittleBlackDuck's profile

LittleBlackDuck

5954 posts in 1734 days


#12 posted 07-19-2020 12:32 AM



LBD… 100
- Ivan

Gr8hinter… I made jig in 2 minutes
- Ivan


Still working on number 101….

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Ivan's profile

Ivan

16393 posts in 3781 days


#13 posted 07-19-2020 04:58 AM

LBD… You crazy buddy.. hehehe

-- Ivan, Croatia, Wooddicted

View doubleDD's profile

doubleDD

9794 posts in 2957 days


#14 posted 07-19-2020 10:37 PM

Good way to get those cards standing. Nice job Ivan.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View oldnovice's profile

oldnovice

7681 posts in 4281 days


#15 posted 07-20-2020 07:08 PM

Ivan, you are quite the CARD maker!
Yours are probably a lot better than the plastic ones I saw at an office supply store.

-- "It's fine in practise but it will never work in theory"

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com