LumberJocks

Table saw drawers

  • Advertise with us
Project by Nate2601 posted 06-28-2020 08:38 PM 493 views 1 time favorited 6 comments Add to Favorites Watch
Table saw drawers
Table saw drawers No picture No picture No picture No picture No picture
Zoom Pictures

Finished up these drawers for the new saw. Used plans from Fix This Build That and tweaked them to fit my needs. Slides are 22” full extension and everything is made from scrap 3/4” plywood I had in the shop. This was my first attempt at doing reveals on the drawer fronts and the 2 vertical slides really through me for a loop. Overall it fits the bill, wish I had used birch plywood but it is done and I’m on to the next project.

I know this isn’t a tool review post, but so far I’m pretty happy with the 1023RLX, few small things I don’t like but it is a huge improvement from my old delta contractor right tilt.





6 comments so far

View therealSteveN's profile

therealSteveN

5773 posts in 1351 days


#1 posted 06-29-2020 07:01 AM

Awesome. More please on how you mounted it to that infernal rail that attaches the main base to the wheels to the right, and would love to see what you have going on inside the drawers. Also pleas post specs of the overall size. I would never have guess you had 22” slides inside of there.

-- Think safe, be safe

View Nate2601's profile

Nate2601

20 posts in 1116 days


#2 posted 06-29-2020 03:47 PM

Measurements 28” high, 24” deep, 26” wide. The cabinet rests on the U channel that the legs rest in. I used machine screws to to secure the cabinet to the front legs of the extension table and 2 more machine screws into the cross piece that attached the 2 mobile bases together. If I notice that the cabinet moves or is unstable I’m going to put a filler into the u-channel and secure it to the u-channel, then secure the bottom of the cabinet to the filler or add a wheel to the left front of the cabinet to support the weight. I was moving everything around yesterday and didn’t notice any problems.

I purchased plans from :

https://fixthisbuildthat.com/table-saw-cabinet-diy-storage-plans/

and tweaked them a little to fit my saw. Wanted to go the entire length of the extension table but with the G1023rl I need to have access to the right side panel to secure the riving knife and splitter.

View MrDJC's profile

MrDJC

6 posts in 26 days


#3 posted 06-29-2020 05:01 PM

Nice. I just ordered that exact same saw.

View Nate2601's profile

Nate2601

20 posts in 1116 days


#4 posted 06-29-2020 05:47 PM



Nice. I just ordered that exact same saw.

- MrDJC


Enjoy

View oldrivers's profile

oldrivers

2204 posts in 2344 days


#5 posted 06-29-2020 11:17 PM

Mighty Fine build you did there.

-- Soli Deo gloria!

View Jim Jakosh's profile

Jim Jakosh

24803 posts in 3883 days


#6 posted 06-30-2020 01:18 PM

Real nice addition to the saw.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com