LumberJocks

Electric Hammer

  • Advertise with us
Project by ElmoSr posted 12-27-2010 11:28 PM 2179 views 1 time favorited 13 comments Add to Favorites Watch
Electric Hammer
Electric Hammer No picture No picture No picture No picture No picture
Zoom Pictures

Here is a hammer I fixed to help me work in my old age, want to mount that cross hair scope on this ,,see if it can help me aim…,also a board I completed just before Christmas—-I want in the board club too, I have been lurking around about a year looking and stealing ideas for boards,,,reckon I should send a bunch of you guys a commission for some of the success I had.

-- ElmoSr,Ga. Life is Hard by the Yard,,,But a Cinch by the Inch





13 comments so far

View jockmike2's profile

jockmike2

10635 posts in 5050 days


#1 posted 12-27-2010 11:35 PM

TOO FUNNY ELMO, BUT A VERY NICE BOARD.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View Manitario's profile

Manitario

2816 posts in 3687 days


#2 posted 12-28-2010 12:09 AM

nice, you should patent the hammer design before someone steals the idea….what wood did you use for the cutting board?

-- Sometimes the creative process requires foul language. -- Charles Neil

View Jonathan's profile

Jonathan

2609 posts in 3854 days


#3 posted 12-28-2010 12:26 AM

Looks like cherry, maple, and walnut to me. Also looks like a nice board!

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View ElmoSr's profile

ElmoSr

243 posts in 3830 days


#4 posted 12-28-2010 12:31 AM

Thanks

Jonathan you are correct,,, the board is 14 X 19X 1 1/2

-- ElmoSr,Ga. Life is Hard by the Yard,,,But a Cinch by the Inch

View Jonathan's profile

Jonathan

2609 posts in 3854 days


#5 posted 12-28-2010 12:33 AM

That’s a nice, hefty size, for sure… Beefy!

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View CharlieM1958's profile

CharlieM1958

16286 posts in 5022 days


#6 posted 12-28-2010 01:06 AM

Dang… I hate tools with those stubby little cords. You have to move your work so close to the outlet!

-- Charlie M. "Woodworking - patience = firewood"

View Dennisgrosen's profile

Dennisgrosen

10880 posts in 3919 days


#7 posted 12-28-2010 01:12 AM

even thow its electric there isnĀ“t much swing over the hammer with that short cord….
sorry back to the design-table and re draw the design

Dennis

View dq2's profile

dq2

71 posts in 3608 days


#8 posted 12-28-2010 04:04 AM

Love the AC hammer. Do you have plans for a DC battery design as well? Nowadays portability is everything.

-- - DQ in Phoenix -

View Jamie Speirs's profile

Jamie Speirs

4168 posts in 3660 days


#9 posted 12-28-2010 01:01 PM

Great fun and a nice board.

Jamie

-- Who is the happiest of men? He who values the merits of others, and in their pleasure takes joy, even as though 'twere his own. --Johann Wolfgang von Goethe

View ElmoSr's profile

ElmoSr

243 posts in 3830 days


#10 posted 12-28-2010 05:10 PM

yes that short cord does cause some problems,,i reckon i will have to go redesign the hammer some Dennis,,,dq2 i think the redesign will include a battery——this might take awhile as the electric hammer tied up several minutes and a few brain cells. it is rather cold here today so it will be tomorrow before i wander out to the shop,

-- ElmoSr,Ga. Life is Hard by the Yard,,,But a Cinch by the Inch

View abie's profile

abie

914 posts in 4574 days


#11 posted 12-28-2010 05:51 PM

The scope and this , plus the Chain saw will make good companions.

-- Bruce. a mind is like a book it is only useful when open.

View ClayandNancy's profile

ClayandNancy

527 posts in 3819 days


#12 posted 12-28-2010 05:56 PM

Any chance of a tool kit like Dewalt, electric saw, drill, light,.....

View souichiro's profile

souichiro

369 posts in 4149 days


#13 posted 12-31-2010 03:33 AM

LOL, I love this! I went shopping for one after you last told me about this wonderful tool…... and couldn’t find one. Being a certified registered harmonized scientist electromechanical engineer, I reverse engineered yours and made my own. I can’t wait to compete with you in the open market, my friend.

-- Dale, Oregon

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com