Table Saw Outfeed and Extension Table

  • Advertise with us
Project by James posted 05-29-2020 11:22 PM 903 views 0 times favorited 2 comments Add to Favorites Watch

I had a 50”x50” section of maple butcher block with a sink cutout. It was beat to crap, weathered, bowed, cracked, everything. I cut it up, rejoined the cracked pieces. I joined two pieces lengthwise to make the outfeed deeper, rather than longer. I edged it in mahogany and oiled/waxed it. It’s sitting on legs that are height adjustable and on a base that have non-locking swivel casters.

I think…. it’s the sexiest outfeed table out there. The whole thing was made with glue and dominos.

-- James - Semper Fi

2 comments so far

View Rick  Dennington's profile

Rick Dennington

7167 posts in 4356 days

#1 posted 05-30-2020 02:13 PM

Very slick, indeed…..!! A good outfeed table is a must for a table saw. You have to have one that is big enough to handle full sheets of ply and other lumber. This looks like it fits the bill…..!! Good job on the build…..!!

-- " There's a better way.....find it"...... Thomas Edison.

View therealSteveN's profile


8240 posts in 1736 days

#2 posted 05-30-2020 04:40 PM

Cuts will improve, not to mention safety aspects, and you got the huge cut out, out from under foot. Win Win.

-- Think safe, be safe

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics