LumberJocks

5ft. high corner jewelry cabinet

  • Advertise with us
Project by exsubsailor posted 05-09-2020 03:39 PM 817 views 2 times favorited 14 comments Add to Favorites Watch

Trying something a little different this time. I got this spectacular veneer on eBay and finally decided on something to show it off. This 3 legged jewelry cabinet, about 5 Ft. high is made to go in a corner of a room. I didn’t have any plans to go by, so I made up my own dimensions for what I pictured in my mind. The doors have a slight curve to them, accomplished by ripping 7/8” strips of wood on a slight angle so when they were glued together they had a slight curve. Of course it involved a lot of soothing and shaping on both outside and inside of each door before applying the veneer. The figured on the outside and plain mahogany inside. The 3 legs also have a slight curve. The inside draws are maple with a quilted maple veneer on the front, with turned ziracote draw pulls. They all have partitions inside the draws for various sized jewelry along with ziracote rods and pegs to hang earrings and bracelets at the top of the open space above the draws. Near the bottom of the legs is a shelf for a nic-nac and it adds to the structural support of the legs.

-- Art, Florida





14 comments so far

View recycle1943's profile

recycle1943

4597 posts in 2433 days


#1 posted 05-09-2020 03:55 PM

everything about it is outstanding I really like the way you tied the bottom shelf to the legs
I’m guessing it’s displayed in a gallery ? quality like this should be in a museum

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View LeeRoyMan's profile

LeeRoyMan

1268 posts in 538 days


#2 posted 05-09-2020 04:24 PM

I love the “Quilted Makore” on the front.
Very Nice Work.

-- I only know what I know, nothing less, nothing more -- That doesn't count what I used to know..

View MrWolfe's profile

MrWolfe

979 posts in 935 days


#3 posted 05-09-2020 04:36 PM

Stunning.
Absolutely stunning.
Jon

View maineman1's profile

maineman1

14 posts in 2681 days


#4 posted 05-09-2020 05:03 PM

Nicely proportioned. Great job.

-- Mike facebook/littlemaincreations

View pottz's profile

pottz

10451 posts in 1795 days


#5 posted 05-09-2020 05:11 PM

that is one stunning piece,your work always impresses me.love your design and wood choice.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View wildwoodbybrianjohns's profile

wildwoodbybrianjohns

1842 posts in 358 days


#6 posted 05-09-2020 05:38 PM

Wow! Those doors are just to die for. The drawer fronts are also beautiful. What I like most though, is rather than using pulls for the doors, you shaped those cutouts for the hand; and in so doing, allow a peak at whats inside.

-- Wildwood by Brian Johns: The Big Bang: Nothing - exploded into Everything. Thanks to Nothing.

View OnhillWW's profile

OnhillWW

247 posts in 2043 days


#7 posted 05-09-2020 07:27 PM

Beautiful work all around, from design through execution. I have to confess, if I got my hands on that veneer I would be in full blown analysis paralysis as to what project I could design that would be worthy of such a outstanding piece of wood. Nice work.

-- Cheap is expensive! - my Dad

View 49er's profile

49er

182 posts in 2416 days


#8 posted 05-09-2020 08:16 PM

Excellent, I don’t want my wife to see this or I’ll be in the shop trying to make something like it.

View tinnman65's profile

tinnman65

1406 posts in 4225 days


#9 posted 05-09-2020 09:19 PM

Beautiful work, Whene I see somthing like this its hard to say something that hasn’t already been said. let me just say I agree with everyone above!

-- Paul--- Creativity is allowing yourself to make mistakes. Art is knowing which ones to keep. — Scott Adams

View Foghorn's profile

Foghorn

530 posts in 198 days


#10 posted 05-10-2020 01:28 AM

Just wow!

-- Darrel

View swirt's profile

swirt

5341 posts in 3783 days


#11 posted 05-10-2020 02:33 AM

Amazing wood, combined with incredible talent and great design leads to this. Well done.

-- Galootish log blog, http://www.timberframe-tools.com

View Peteybadboy's profile

Peteybadboy

2046 posts in 2761 days


#12 posted 05-10-2020 10:36 AM

Outstanding.

-- Petey

View ohwoodeye's profile

ohwoodeye

2464 posts in 3964 days


#13 posted 05-11-2020 06:32 PM

Going to need a lot more expensive jewelry to fill that beauty.
Well done.

-- "Fine Woodworking" is the name given to a project that takes 3 times longer than normal to finish because you used hand tools instead of power tools. ----Mike, Waukesha, WI

View dewoodwork's profile

dewoodwork

241 posts in 4767 days


#14 posted 05-13-2020 02:04 AM

Beautiful project.

-- Express creativity with wood, Dewayne. Vacaville CA.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com