Walnut Rimmed bowl

  • Advertise with us
Project by Julian posted 04-14-2020 02:27 PM 803 views 3 times favorited 18 comments Add to Favorites Watch

This the second lattice rimmed bowl I have made with my fluting jig. It’s made from walnut and maple. 12” diameter. This was a fun project. Sanding and cleaning up the wood fibers inside the lattice is tedious but worth the effort. I still need to spray the bowl with shellac and then some satin lacquer.

-- Julian

18 comments so far

View GR8HUNTER's profile


7646 posts in 1513 days

#1 posted 04-14-2020 02:30 PM

WOW super beautiful GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View John's profile


1837 posts in 2071 days

#2 posted 04-14-2020 02:43 PM

I’m amazed that at no point in that rim there wasn’t a spot where the wood didn’t chip or fly apart! Well planned and executed, looks perfect!

-- John, Sunshine Coast, BC, Canada.

View Julian's profile


1591 posts in 3491 days

#3 posted 04-14-2020 02:58 PM

I m amazed that at no point in that rim there wasn t a spot where the wood didn t chip or fly apart! Well planned and executed, looks perfect!

- John

I used an up-spiral router bit which helps prevent tear out and chipping.

-- Julian

View pottz's profile


10261 posts in 1785 days

#4 posted 04-14-2020 03:19 PM

another beauty julien,keep getting better and better.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View PaulDoug's profile


2391 posts in 2504 days

#5 posted 04-14-2020 03:21 PM


Have you tried a Mac Mop to remove the fibers off the piece. I’m a scroller, we call them fuzzies… I do lots of intricate portraits and use a 7” x 1” Mac Mop to remove the fuzzies off the back/front of the picture. I mount it on my lath. Have not lost a fragile piece yet.

-- “We all die. The goal isn't to live forever; the goal is to create something that will.” - Chuck Palahniuk

View tyvekboy's profile


2025 posts in 3814 days

#6 posted 04-14-2020 04:56 PM

Another beautiful piece of art. Thanks for sharing.

-- Tyvekboy -- Marietta, GA ………….. one can never be too organized

View Peteybadboy's profile


2015 posts in 2750 days

#7 posted 04-14-2020 05:32 PM

Julian, your work is amazing.

-- Petey

View woodchuckerNJ's profile


1394 posts in 2435 days

#8 posted 04-14-2020 07:24 PM

nice, I like the front… really nice, the contrast works, the design is very smart.

-- Jeff NJ

View Tony_S's profile


1335 posts in 3884 days

#9 posted 04-14-2020 11:43 PM


-- “Wise men speak because they have something to say; fools because they have to say something.” – Plato

View Vince's profile


1267 posts in 4230 days

#10 posted 04-15-2020 05:02 AM

That is nice, great job

-- Vince

View therealSteveN's profile


5912 posts in 1375 days

#11 posted 04-15-2020 05:26 AM

Fabulous work Julian.

-- Think safe, be safe

View MJR's profile


370 posts in 1215 days

#12 posted 04-15-2020 11:34 AM

Wow, Just wow. I’d like to see the process for this

View horky's profile (online now)


306 posts in 3731 days

#13 posted 04-15-2020 12:41 PM

Yet another beautiful piece.
Just curious, did you use a circle cutter with your router on the underside of the rim? What did you use for the arcs on the top side of the rim? Any in-progress shots of these cuts?

View mbg's profile


17 posts in 4178 days

#14 posted 04-15-2020 01:10 PM


I would love to hear how this is created and more about your fluting jig.


View Dark_Lightning's profile


4141 posts in 3910 days

#15 posted 04-15-2020 01:57 PM

I knew who the artist was right when I saw the picture. That’s really neat!

-- Steven.......Random Orbital Nailer

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics