LumberJocks

Oval 2 Tier Walnut Coffee Table

  • Advertise with us
Project by LeeRoyMan posted 02-21-2020 08:44 PM 763 views 0 times favorited 14 comments Add to Favorites Watch

Coffee Table Commission,

The tops are 3/4 walnut plywood, with the edges veneered with wood on wood veneer.
The brass legs are 3/8×4” x 18
It’s finished with an oil stain, and 3 coats of pre-cat lacquer (dull rubbed sheen)

A little more info on the build is here.
https://www.lumberjocks.com/LeeRoyMan/blog/130649

Thanks for looking





14 comments so far

View therealSteveN's profile

therealSteveN

5107 posts in 1245 days


#1 posted 02-21-2020 09:50 PM

Nice table LeeRoy. Out of the box thinking is good. It’s certainly not a table to be found at the corner shop.

-- Think safe, be safe

View teetomterrific's profile

teetomterrific

103 posts in 1033 days


#2 posted 02-21-2020 10:50 PM

Great design. Well executed. I like it!

-- Tom, Adams, TN

View pottz's profile

pottz

8276 posts in 1655 days


#3 posted 02-22-2020 12:14 AM

wow buddy well executed,it just takes mt breath away.and you were asking us for help,you knew what the hell you were doing all along.your far too humble my friend.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View LeeRoyMan's profile (online now)

LeeRoyMan

744 posts in 398 days


#4 posted 02-22-2020 02:10 AM

Thanks Steve, but I can’t take credit for the design, designers did it. Probably copied it from somewhere anyway.

Thanks Tom

Thanks Pottz,
I didn’t know all along, I just have the confidence in my experience. It’s fun to get opinions and helps others get ideas at the same time.

Sharing the Knowledge …. (Todd A. Clippinger)

View pottz's profile

pottz

8276 posts in 1655 days


#5 posted 02-22-2020 02:29 AM

id love love to spend a week just soaking up all i could from you.your very talented my friend,and you inspire me to do more and better,thank you for being here and sharing your knowledge.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View MrWolfe's profile (online now)

MrWolfe

718 posts in 794 days


#6 posted 02-22-2020 02:41 AM

Excellence on display!!!
Great design and you pulled it off.
Looks beautiful and flawless!
Jon

View mel52's profile

mel52

1280 posts in 936 days


#7 posted 02-22-2020 03:14 AM

Beautiful and a very cool idea with the brass accents. Excellent job !!! Mel

-- MEL, Kansas

View Rich's profile

Rich

5346 posts in 1260 days


#8 posted 02-22-2020 05:42 AM

You are The Man, LeeRoy. Great work.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View Tony_S's profile

Tony_S

1129 posts in 3754 days


#9 posted 02-22-2020 10:41 AM

Sweet! The brass looks better than I thought it would.
Still brass though….damn designers.

-- “Wise men speak because they have something to say; fools because they have to say something.” – Plato

View LeeRoyMan's profile (online now)

LeeRoyMan

744 posts in 398 days


#10 posted 02-22-2020 03:17 PM



id love love to spend a week just soaking up all i could from you.

- pottz


Thanks pottz,
but I think you would probably leave disappointed. Not really much to share, everything I do is basic woodworking. I think I just get some fun projects every once in a while.

View LeeRoyMan's profile (online now)

LeeRoyMan

744 posts in 398 days


#11 posted 02-22-2020 03:21 PM

Thanks Jon and Mel,
I appreciate you taking the time to look, and for leaving a comment.

Thanks Rich, always grateful.

Thanks Tony,
That Damn brass was a lot of work. More than I planned for.

View  woodshaver Tony C   's profile

woodshaver Tony C

7329 posts in 4024 days


#12 posted 02-29-2020 02:51 AM

Just checking out your beautiful work LeeRoy! Love the table design! Very Nice work! Also took a look a the steps you made using skids! Now that is really thinking outside of the box! Good stuff!

-- St Augustine FL, Experience is the sum of our mistakes!

View LeeRoyMan's profile (online now)

LeeRoyMan

744 posts in 398 days


#13 posted 02-29-2020 03:36 AM

Thank You,
This was a fun build,

Speaking of good stuff, you have quite the project portfolio yourself. Lots of Nice work,
AND your fair share of thinking outside the box as well.

Thanks again for your GIF help!

View  woodshaver Tony C   's profile

woodshaver Tony C

7329 posts in 4024 days


#14 posted 02-29-2020 03:46 AM

Thanks LeeRoy! And you are very welcome! Still don’t know why it changed like that it used to work so easy!
Anyway Woodworking is fun! Keep up the good work!

-- St Augustine FL, Experience is the sum of our mistakes!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com