LumberJocks

Cutting Board with Curved Inlay

  • Advertise with us
Project by docspencer posted 02-10-2020 03:57 PM 660 views 2 times favorited 4 comments Add to Favorites Watch
Cutting Board with Curved Inlay
Cutting Board with Curved Inlay No picture No picture No picture No picture No picture
Zoom Pictures

Like many of you, I have lots of scraps laying around the shop. I’ve been watching videos on making a curved inlay cutting board and wanted to give it a try. Of course, this project required at least one new router bit… In any event, I made one that sold so I figured I’d try another one. This one went much better than the first try. This one was made from ambrosia maple, maple, and cherry. The inlay is white oak sandwiched between walnut. Maybe for the next one I’ll try interlacing the inlay strips. Thanks for taking a look.





4 comments so far

View unclearthur's profile

unclearthur

359 posts in 2596 days


#1 posted 02-11-2020 06:24 AM

Nice board!

View Joe Weaver's profile

Joe Weaver

538 posts in 4494 days


#2 posted 02-11-2020 02:45 PM

wow

-- Joe, Ga

View therealSteveN's profile (online now)

therealSteveN

5954 posts in 1382 days


#3 posted 02-11-2020 03:27 PM

Nice board.

Did you just set the strip in straight, and use clamp pressure to pull it into shape against a curved cut on the board itself?

-- Think safe, be safe

View docspencer's profile

docspencer

429 posts in 2753 days


#4 posted 02-11-2020 03:40 PM

Yes, SteveN, that’s exactly what I did. A bit tricky as you might guess. Used my parallel clamps for the initial clamping then once I got it snug, tightened the bar clamps. Even then, the pieces want to walk all over the place. Use a long set glue.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com