Drill charging station

  • Advertise with us
Project by Tugboater78 posted 02-07-2020 01:28 PM 1263 views 1 time favorited 6 comments Add to Favorites Watch

Needed an upgraded version of my old charging station that was built, based on the popular plans found here at I have since outgrown the old one.

This one is 32” wide, 36” tall, 12” deep.
Will hold 8 drills and/or air guns

I will be making/reusing some bit holders that will mount on inside of the doors. The inside shelving in inset 2” to accomodate.
Shelves on left are fixed, but upper could be moved by removing pocket screws. Shelves on right are adjustable.

Behind the battery storage is where i have a power strip mounted and the chargers are plugged in.

Its currently sitting with my other tool storage in my future living room, while i am remodeling. Eventually will put in my future shop
Crappy pictures due to cracked lens on cell phone

Hope you enjoy

-- "....put that handsaw to work and make it earn its keep. - summerfi" <==< JuStiN >==>=->

6 comments so far

View swirt's profile


6618 posts in 4210 days

#1 posted 02-07-2020 03:14 PM

Nice build. I need to make one of these.

-- Galootish log blog,

View Madmark2's profile


3091 posts in 1826 days

#2 posted 02-07-2020 03:18 PM

You need to let the camera acclimatize so the lens doesn’t fog. LOL

The charging station is nice.

-- The hump with the stump and the pump!

View abie's profile


926 posts in 5009 days

#3 posted 02-07-2020 03:23 PM

Ditto to Madmark…

-- Bruce. a mind is like a book it is only useful when open.

View luv2learn's profile


3143 posts in 3541 days

#4 posted 02-07-2020 04:26 PM

Well thought out Justin. Nicely done.

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View Rick  Dennington's profile

Rick Dennington

7170 posts in 4432 days

#5 posted 02-07-2020 07:32 PM

Anyone who works the wood needs a good drill/ charging station anymore….! They are all the rage….just like clamp racks, table saw storage underneath the outfeed side, crosscut sleds, etc….I too have all of them…:) This will fit nicely in your future shop, or your living room now…!! Well thought out, and well organized…..Good job….!! I built a drill charging station for my shop a couple of years back….here is my version…..!! It also includes 3 boxes for different size screws, which sit on a 20 degree angle for easy viewing…..!!

-- " There's a better way.....find it"...... Thomas Edison.

View Peteybadboy's profile


3985 posts in 3187 days

#6 posted 02-07-2020 08:19 PM

Justin, First nice job. I love mine. I got the idea to build one from LJ.

-- Petey

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics