LumberJocks

In Between...

  • Advertise with us
Project by newTim posted 01-12-2020 10:49 PM 503 views 2 times favorited 3 comments Add to Favorites Watch

In between super high quality, museum caliber, uber-fine projects, I like to do one or two shop projects. :) Here’s a simple sandpaper organizer with lots of parts. I picked up the tip of adhering sandpaper to (free) paint stirrers to create simple but effective sandpaper files. I also like the use of beveled slats for hanging storage. This is how I hang cabinets. In this project I used 1/2” ply (versus 3/4”) for the hangers and it seems to work fine. I also made a gluing/nailing jig-fixture to make assembly of the trays easier.

-- tim hill www.newcalshop.com





3 comments so far

View Woodknack's profile

Woodknack

13017 posts in 2987 days


#1 posted 01-12-2020 11:33 PM

That is one handy dandy sandpaper cabinet.

-- Rick M, http://thewoodknack.blogspot.com/

View LittleBlackDuck's profile

LittleBlackDuck

3428 posts in 1427 days


#2 posted 01-13-2020 02:14 AM

That is neat, however, love your timing…

Why did your’s,

manage to FIT???

-- If your first cut is too short... Take the second cut from the longer end... LBD

View newTim's profile

newTim

620 posts in 4213 days


#3 posted 01-13-2020 06:25 PM

Ha Ha… I cut the bottoms first, since they are all the same depth I only had the change the width for the narrow trays. The same depth setting is used for the sides of the dividers. The only critical measurement was the width of the front/back dividers for the large and narrow dividers. Built an assembly jig, cut to fit the first set and used those to repeat.

-- tim hill www.newcalshop.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com