| Project by cowboyup3371 | posted 01-09-2020 10:35 PM | 1164 views | 1 time favorited | 5 comments |  |
 |
Finished the second Christmas gift earlier this week and the stand yesterday. Purple heart wood on a rocking pizza cutter blade bought from Woodcraft by my youngest step-son; a friend cut the middle of the blade to allow for it to hang on the stand. The stand is made from scrap Walnut that wouldn’t have seen any other project because of the knot but I felt would work for this. The supports are fairly tightly mortised all the way through the back and glued to help hold them in place. My buddy got to rib me a bit as I don’t ever use screws for my projects but chose to do so in order to attach the back to the base.
-- Cowboy Up or Quit - If you are going to quit than get out of my way
5 comments so far
LittleBlackDuck
home | projects | blog
9454 posts in 2281 days
#1 posted 01-10-2020 06:10 AM
cow’up’ that’s a great looking P’ Cutter...
BUT… a bit presumptious to say its Rocking... just kidding
, 
, say no more!
-- If your first cut is too short... Take the second cut from the longer end... LBD
cowboyup3371
home | projects | blog
207 posts in 1658 days
#2 posted 01-10-2020 10:54 AM
Sorry BlackDuck but your joke fell flat – https://www.woodcraft.com/products/woodriver-16-rocking-pizza-cutter-kit-woodriver
-- Cowboy Up or Quit - If you are going to quit than get out of my way
LittleBlackDuck
home | projects | blog
9454 posts in 2281 days
#3 posted 01-10-2020 11:29 AM
touché… still… the way I like my pizzas…
-- If your first cut is too short... Take the second cut from the longer end... LBD
ralbuck
home | projects | blog
6807 posts in 3726 days
#4 posted 01-10-2020 05:38 PM
You kids—-PLAY NICE!
Looks good to me!
-- Wood rescue is good for the environment and me! just rjR
stefang
home | projects | blog
17040 posts in 4794 days
#5 posted 01-11-2020 01:13 PM
Very nice work and more importantly a pizza cutter that will not drag the cheese and other ingredients all over during cutting. I usually use a knife to cut pizza this way, but your cutter is even better!
-- Mike, an American living in Norway.
Have your say...