Plain Stool

  • Advertise with us
Project by Burban posted 12-22-2010 08:40 PM 1393 views 0 times favorited 1 comment Add to Favorites Watch

I made this stool out of cherry wood. I started with the top glued two pieces together to get the length i needed. Then I sanded it for a long time using all drum sander, vibrating sander, and manual sanding. With that done I routed the edges and moved onto the sides. I had to glue two pieces together again and then I cut the 10 degrees angle on the sides and finally cut the half-circle out of it. Then came alot of sanding. I repeated the process to make my second leg then I made the sides by cutting the top at a 10 degree angle. After that I routed the bottom and it was time for assembly. Finally, I added tung oil as a finish.

P.S. Feel free to criticize I have had my cast off for awhile now.

1 comment so far

View yooper's profile


228 posts in 3879 days

#1 posted 12-23-2010 05:12 AM

NIce stool. Good job. I really like the figuring on the top cherry board(s).

-- Jeff, CT - keep calm and make sawdust

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics