LumberJocks

Jeep logo tray with mountains

  • Advertise with us
Project by TomGrin posted 12-23-2019 05:28 PM 884 views 4 times favorited 4 comments Add to Favorites Watch

A friend asked to have something with the jeep logo. challenge accepted. the tray is 10 1/2” x 20”. The sides are 3/8” thick and 2 1/2” tall and 3 3/4” to the top of the mountains. the sides are walnut with the sap edge for the snow caps. The main tray is birds-eye maple and walnut veneer over 3/8” plywood. I used my Cricut machine to cut the veneer.

-- Tom, May your safety glasses never fog,





4 comments so far

View moke's profile

moke

2107 posts in 4067 days


#1 posted 12-23-2019 07:33 PM

Very creative! Nicely done too!

-- Mike

View splintergroup's profile

splintergroup

6057 posts in 2513 days


#2 posted 12-24-2019 04:00 PM

Any 4×4 fan would love to have that (even me, an early Bronco nut 8^)

View SteveMI's profile

SteveMI

1170 posts in 4585 days


#3 posted 12-24-2019 05:19 PM

Spot on for the off road enthusiast.
Any tips or tricks to cutting veneer with cricut?
Steve.

View TomGrin's profile

TomGrin

89 posts in 1425 days


#4 posted 12-25-2019 03:09 PM



Spot on for the off road enthusiast.
Any tips or tricks to cutting veneer with cricut?
Steve.

- SteveMI

I have the Cricut maker and used the knife blade. I changed the settings and made 10 passes for the cuts.

-- Tom, May your safety glasses never fog,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com