LumberJocks

wine cork trivets

  • Advertise with us
Project by pottz posted 12-15-2019 11:44 PM 1880 views 10 times favorited 52 comments Add to Favorites Watch

finally got the last of christmas gift projects done today,9 wine cork trivets,7-cherry wood,two oregon mrytle wood all with padauk splines in the corners.size is 9”x9” outside with 32 corks per trivet.the bottom, is 1/4 melamine with rubber feet.finish is maloof oil with 2 coats of rattle can semi gloss polycrylic.and the answer you all want to know,yes they all came from wine we drank,i wont say how long it took though-lol.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.





52 comments so far

View anthm27's profile

anthm27

1851 posts in 2395 days


#1 posted 12-16-2019 12:53 AM

Drinking wine a Very Nice pass time.
Oh, the Trivets are great too.
Nice work
Regards
Anth

-- There is no hope for any of us if we keep apologizing for telling the truth.

View pottz's profile

pottz

21313 posts in 2269 days


#2 posted 12-16-2019 12:56 AM

Drinking wine a Very Nice pass time.
Oh, the Trivets are great too.
Nice work
Regards
Anth

- anthm27

thanks buddy im waiting for the duck to chime in considering vino is a hobby bigger than woodworking-lol.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View  woodshaver Tony C   's profile

woodshaver Tony C

8348 posts in 4638 days


#3 posted 12-16-2019 01:26 AM

So you drank all the wine to get the corks and then you made the trivets. I hope some time passed between those two happenings? I’m guessing it did because all of your miters look great pottz! Nice work!

-- St Augustine FL, Experience is the sum of our mistakes!

View pottz's profile

pottz

21313 posts in 2269 days


#4 posted 12-16-2019 01:38 AM



So you drank all the wine to get the corks and then you made the trivets. I hope some time passed between those two happenings? I m guessing it did because all of your miters look great pottz! Nice work!

- woodshaver Tony C

ha ha yeah we had fun drinking all the wine but never while woodworking, alcohol and sharp dangerous tools dont mix well.thanks buddy.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View Mark Wilson's profile

Mark Wilson

2951 posts in 2348 days


#5 posted 12-16-2019 01:54 AM

32×9 = 288 bottles. That explains why there are very few vineyards left here in the Southland. They couldn’t keep up with you, so they gave up.

Are the corks glued in?

-- Mark

View ralbuck's profile

ralbuck

6780 posts in 3551 days


#6 posted 12-16-2019 02:51 AM

Just a little uncorked there!

Nice work.
I will eventualy have to tery to do some of them.

Research and development on those could get expensive though!

-- Wood rescue is good for the environment and me! just rjR

View sansoo22's profile

sansoo22

1879 posts in 939 days


#7 posted 12-16-2019 03:32 AM

I had to google what a trivet is…now i feel like my old pot holders aren’t classy enough.

Nice work on the miters and splines. I also like the variety of the wine corks.

I have a bucket full of them so maybe I will give this a try.

View oldrivers's profile

oldrivers

2802 posts in 2851 days


#8 posted 12-16-2019 03:34 AM

Neat project, I like the splined corners job well done.

-- Soli Deo gloria!

View doubleDD's profile

doubleDD

10799 posts in 3328 days


#9 posted 12-16-2019 03:54 AM

I bet looking back there’s a story behind every cork. A interesting and conversational piece for sure.
Well done pottz.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View robscastle's profile

robscastle

8295 posts in 3489 days


#10 posted 12-16-2019 05:05 AM

Looks fantastic
LBD will love them
Box guy will love the splines
I see a Abranet disk too.. No w a question how long did it take the prepare the materials ?
I see Mark has done a tally 32×9 = 288 bottles .

Interesting to see cork is still used as a stopper, mind you wine is like abranet to me.

Excluding of course port for me but like LBD I would buy a cask !

Some Trivia :- I remember years ago I had a C10 BSA motorbike it had a cork clutch and you could replace the segments if needed.

I love the overall project too! Merry Christmas.

hey did LBD sent you the car accident he nearly had?

-- Regards Rob

View mel52's profile

mel52

2277 posts in 1549 days


#11 posted 12-16-2019 06:16 AM

Great project. I have about a five gallon can of wine corks that someone gave me a couple of years ago. Been trying to figure out what to do with them. I may have to try this project out. Excellent job !!! Mel

-- MEL, Kansas

View Ivan's profile

Ivan

17049 posts in 4152 days


#12 posted 12-16-2019 06:46 AM

Nice bunch of cool gifts! Corks are very clever solution

-- Ivan, Croatia, Wooddicted

View Andre's profile

Andre

4830 posts in 3091 days


#13 posted 12-16-2019 07:11 AM

Most of Dem corks came from wine way above my pay scale:) Besides I’m more of a Scotch or Cognac drinker, not sure if they come with anything other than a cork? You mean there were some splines under all that Glue:)
Good job, guess I should post some of my Wood Butcher on of these days?

-- Lifting one end of the plank.

View LittleBlackDuck's profile

LittleBlackDuck

8237 posts in 2105 days


#14 posted 12-16-2019 09:37 AM

C’mon pottzy, I have to ask… does it come in a cask size?... empty bladders!

Neat mitres… and I can now see why you asked about the gluebot… or was it rc... anyway, whoever it was, happy-snap #5 is a testament to why one needs a gluebot!

Notice that DeWalt doing a Mirka impersonation… is that your attempt to make up the 2 ROS equivalent of a 1 Rotex?

It’s better not to make friends… that way you don’t have to make so many bleeding prezzies… though having to populate them may be a justification. I’ll drink to helping you find residents for the trivets…

-- If your first cut is too short... Take the second cut from the longer end... LBD

View PPK's profile

PPK

1872 posts in 2094 days


#15 posted 12-16-2019 02:11 PM

Nice Potz…
I’ve always thought those cork trivets were cool. Almost cool enough to start drinking wine heavily! Lol.

-- Pete

showing 1 through 15 of 52 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com