LumberJocks

Ring box

  • Advertise with us
Project by ronstar posted 12-13-2019 09:43 PM 542 views 5 times favorited 10 comments Add to Favorites Watch

Made my wife a small ring box. Walnut, figured maple, 1/8” brass rod pin hinges, and lacquer finish. 5.5” x 3.5” x 2.25”.

Got the idea from palm boxes by Andy and SASmith here on Lumberjocks.

-- Ron, Northern Illinois





10 comments so far

View pottz's profile

pottz

7696 posts in 1591 days


#1 posted 12-13-2019 11:20 PM

and of course you included a couple nice diamond rings ron? nice work.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View Jerry's profile

Jerry

3312 posts in 2255 days


#2 posted 12-14-2019 12:41 AM

It’s an absolute beauty Ron. Well done!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View splintergroup's profile

splintergroup

3207 posts in 1829 days


#3 posted 12-14-2019 03:32 PM

Great wood combo, looks excellent!

View ronstar's profile

ronstar

556 posts in 4317 days


#4 posted 12-14-2019 05:55 PM

Thanks! And no – I didn’t include any rings with the box!

-- Ron, Northern Illinois

View ShopCat's profile

ShopCat

121 posts in 4186 days


#5 posted 12-15-2019 01:29 AM

Very nice. Glad you included the note on the brass pin hinge. When I first looked I thought you had used a very small diameter dowel.

-- ShopCat

View pottz's profile

pottz

7696 posts in 1591 days


#6 posted 12-15-2019 02:22 AM



Thanks! And no – I didn t include any rings with the box!

- ronstar


cmon ron,it’s christamas.maybe a cubic zirconia?

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View robscastle's profile

robscastle

6675 posts in 2811 days


#7 posted 12-15-2019 11:23 AM

I also made something similar and it has the same contents!

Nice job!

-- Regards Rob

View doubleDD's profile

doubleDD

8970 posts in 2650 days


#8 posted 12-15-2019 02:53 PM

I very much like this ring box. I should make something similar for my wife. Nice job.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View therealSteveN's profile

therealSteveN

4646 posts in 1181 days


#9 posted 12-16-2019 02:21 PM

That is a very clean look. Like those pin hinges, and always a softie for a box with an interior.

Nice job.

-- Think safe, be safe

View MUST58GT's profile

MUST58GT

108 posts in 833 days


#10 posted 12-20-2019 09:58 AM

Ditto for me, like those pin hinges and lined interior. That’s hard to get right! Nice job!

-- Richard, Austin TX - "Every repair job is really just an upgrade oppty in disguise!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com