| Project by Doug | posted 12-12-2019 02:11 PM | 1101 views | 0 times favorited | 3 comments |  |
 |
It’s been quite a while since I’ve been able to post anything on here. It’s good to be back.
This is a shop project that’s been a long time coming. I wanted all of my handsaws to be in one place so I made this handsaw caddy. I based the design on some plans I downloaded from somewhere. I’m sure they’re easy enough to find online.
The material is just some cut-offs that I scrounged from a construction site. I want people to know that they don’t have to spend a lot of money on materials and equipment to make things. They can use whatever material they can come up with and just some basic tools.
Check out the video of how I made it on my new You Tube channel Just Throwin' It Together This is the channel that I will be using to post my “How to” videos. Be sure to like and subscribe.
-- Doug
3 comments so far
mafe
home | projects | blog
12845 posts in 4063 days
#1 posted 12-12-2019 10:44 PM
Looks really fine, coud use a close up. ;-)
smiles,
Mads
-- MAD F, the fanatical rhykenologist and vintage architect.
Doug
home | projects | blog
1178 posts in 3735 days
#2 posted 12-13-2019 08:49 PM
Thanks Mads. The pic that I took turns side ways when I try to load it. I’ll upload another to if that still happens. Any ideas as to why that happens?
-- Doug
mafe
home | projects | blog
12845 posts in 4063 days
#3 posted 12-13-2019 09:31 PM
Smiles.
Not really, but if it’s on your mobile, the try to edit it on the phone, like making it a wee brighter or so and then save it. Usually the new picture will be right direction. If it’s not all ready then you can rotate it on the phone also.
Best thoughts,
Mads
-- MAD F, the fanatical rhykenologist and vintage architect.
Have your say...