LumberJocks

Cherry Guitar Holder

  • Advertise with us
Project by Greg Sherman posted 12-12-2019 01:21 AM 385 views 2 times favorited 2 comments Add to Favorites Watch

Hey Lumberjocks,
I just finished this guitar holder. The base is Cherry with Walnut for the horizontal arms. I purchased a set of taper plug cutters – this is the plug on the Cherry base. I debated on how far to recess these plugs in the base. Or to reverse the plugs, as I ended up doing. I also used a set of straight plug cutters for the arm mounts. Those plugs were trimmed flush. I am interested in comments and advice on plugs. Need to get some experience with plugs to get them correct.
Thanks for checking out the Cherry Guitar holder.
Greg

-- Greg, Brentwood CA http://GregShermanDesigns.com





2 comments so far

View Rick  Dennington's profile

Rick Dennington

6789 posts in 3805 days


#1 posted 12-12-2019 04:45 AM

The horizontal pieces are Walnut….!!!

-- " There's a better way.....find it"...... Thomas Edison.

View Doug's profile

Doug

1124 posts in 3372 days


#2 posted 12-13-2019 09:02 PM

I love how simple it is. A clean and very useful design. Thumbs up.

-- Doug

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com