LumberJocks Woodworking Forum banner

Comments

· Registered
Joined
·
1,434 Posts
That finish adds a lot of character.
 

· Premium Member
Joined
·
120 Posts
I'm working on something similar - 'farm style' end tables, but with painted frames and stained tops. Been a little frustrated with the way stain 'takes' on 2x lumber, even with pre-stain conditioner - very inconsistent :(

I'd be very interested in hearing about your finishing process - what you used, in what order, etc.!
 

· Registered
Joined
·
6 Posts
On the dining room table I sanded down the table top (2×12) with 60-100-220 paper. After sanding I took Jacobean colored stain(very dark) and stained it knowing it will dry lighter on the 2x wood (I stained it 3 coats) the dark color hides a lot of the imperfections on the wood.

For the other table with the "whitewash" look.
I sanded the same way, then took a paint brush and slapped the stain on sloppily. This gave it the used look. Then when that dried i did the same with white paint and then I once more hit it with the stain. This gave it the "white washed" look
 

· Premium Member
Joined
·
120 Posts
How long are you leaving the stain before wiping it off?
 
Top