Cutting boards

  • Advertise with us
Project by GerardoArg1 posted 12-05-2019 07:13 PM 593 views 0 times favorited 1 comment Add to Favorites Watch

I am in charge of preparing individual tables. They are the ones we normally use here for “asado”.
As I did not get hardwood to make it in one piece … I had to laminate.
That’s why I went to the local warehouse; look for all the pieces of hardwood I found, then just go through the planer to try to have a similar thickness when working. I could not say what wood they are, since neither the seller knew because they are mostly remains.
Subsequently cut into pieces of 25 cm to have the least waste. These pieces were arranged so as to achieve the necessary measure, which would be 25 cm * 25 cm. Gluing and pressing, add a few small dowels to help resistance (I hope it supports the use … at least for a while!)
The finished is with beeswax.
I send you a big hug and see you next time!

-- Disfruta tu trabajo (enjoy your work) (Bandera, Argentina)

1 comment so far

View Diego Cassels's profile

Diego Cassels

233 posts in 1244 days

#1 posted 12-05-2019 07:49 PM

Excellent Job Gerardo!!
I have to do some for me, I plan to do them this summer. I’ll have to check with you the process as not to make to many mistakes!

Muy buen trabajo amigaso!! Quedaron de lujo… despues te charlo para contarte mi idea a ver que te parece.

-- Diego Cassels

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics