Crosscut Sled

  • Advertise with us
Project by Tomoose posted 12-21-2010 03:20 AM 2978 views 14 times favorited 16 comments Add to Favorites Watch

Quick and dirty crosscut sled – what a difference this makes on accuracy (not to mention safety). Should have made this ages ago.

Thanks for looking.

-- “I am always doing that which I cannot do, in order that I may learn how to do it.” Pablo Picasso

16 comments so far

View spunwood's profile


1202 posts in 3199 days

#1 posted 12-21-2010 03:47 AM

Looks neither quick nor dirty, but rather the most handsome sled I have seen. Well done!

-- I came, I was conquered, I was born again. ἵνα ὦσιν ἓν

View DrAllred's profile


137 posts in 3186 days

#2 posted 12-21-2010 04:02 AM

Looks great!!!!

I need to make two of those, one for 90s and one for 45s. Just made some boxes and could not get the 45s to match because I was sliding a small board and it was binding.

-- David, Mesa Arizona

View Marc5's profile


304 posts in 3705 days

#3 posted 12-21-2010 04:08 AM

Just got motivated to make one. Thanks

-- Marc

View RetiredCoastie's profile


999 posts in 3545 days

#4 posted 12-21-2010 04:11 AM

Nice sled! looks well made, thanks for posting.

-- Proud Supporter of Homes For Our Troops

View brianinpa's profile


1812 posts in 4086 days

#5 posted 12-21-2010 05:15 AM

I never really needed a cross cut sled until I started making cabinets for my kitchen redo. Now that I have it, I have no idea how I worked without it. Nice work.

-- Brian, Lebanon PA, If you aren’t having fun doing it, find something else to do.

View Routerisstillmyname's profile


763 posts in 3872 days

#6 posted 12-21-2010 05:57 AM

You can never have enough CC sleds. Perfect design. no waste on right side.

-- Router è ancora il mio nome.

View Dusty56's profile


11838 posts in 4051 days

#7 posted 12-21-2010 06:15 AM

Very nice sled ….nothing wasted on this one : )
Favorited !!

-- I'm absolutely positive that I couldn't be more uncertain!

View Don's profile


517 posts in 3435 days

#8 posted 12-21-2010 06:21 AM

Very cool! Next to my table saw my sled is the most important too in my shop. I’ve always made them with the blade centered but my next one is going to off centered like yours.

-- Don - I wood work if I could. Redmond WA.

View Robsshop's profile


920 posts in 3337 days

#9 posted 12-21-2010 07:19 AM

Very nice TS upgrade,probably the best upgrade to a saw one can do IMO. The design and construction look rock solid and it is a great addition to performing several cutting operations we wood workers come up against. It will make Your life that much easier and safer when called upon. Your design is a good choice and easily adaptable to some add-on,s such as a removable Lexon shield spanning both fences over top of blades path( a great safety feature) ! Once again great job on a popular fixture !

-- Rob,Gaithersburg,MD,One mans trash is another mans wood shop treasure ! ;-)

View Eagle1's profile


2066 posts in 3427 days

#10 posted 12-21-2010 12:26 PM

Great job I really use mine alot.

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

View Ken90712's profile


17659 posts in 3551 days

#11 posted 12-21-2010 01:18 PM

Well done.

-- Ken, "Everyday above ground is a good day!"

View woodsmith1's profile


58 posts in 3318 days

#12 posted 12-21-2010 02:47 PM

Very nice! I really need to make one of these.

View workerinwood's profile


2717 posts in 3430 days

#13 posted 12-21-2010 03:08 PM

Nice!! This is on my to do list.

-- Jack, Albuquerque

View Tom's profile


30 posts in 3782 days

#14 posted 12-21-2010 05:23 PM

Nice, just made my first one…now I will go burn it!!!

-- Tom

View makedust's profile


53 posts in 3280 days

#15 posted 12-21-2010 05:36 PM

Great looking sled. I have made one, very crude, but it works. I think I will make a new one like your design though. It looks terrific…Ron

-- "Happiness is creating dust"

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics