LumberJocks

Onesies

  • Advertise with us
Project by Grant Davis posted 10-14-2019 05:30 PM 404 views 0 times favorited 4 comments Add to Favorites Watch

Onesies that I made over the weekend on my CNC.

GarageworX 18×24 CNC
Vectric VCarve Pro software
Sweetheart font
Select pine
45 deg vbit for the text
.25” compression bit for the profile

Spray shellac finish
Hand paint the letters
Finish sand thru the grits
Spray shellac for the final finish

-- Grant...."GO BUCKEYES"





4 comments so far

View Don Broussard's profile

Don Broussard

3813 posts in 2787 days


#1 posted 10-14-2019 06:05 PM

Great idea! Do you use the CNC to cut out the onesies, or just to create the engraving?

-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!

View Grant Davis's profile

Grant Davis

811 posts in 4444 days


#2 posted 10-14-2019 07:04 PM



Great idea! Do you use the CNC to cut out the onesies, or just to create the engraving?

- Don Broussard

They are profile cut out also

-- Grant...."GO BUCKEYES"

View therealSteveN's profile

therealSteveN

4079 posts in 1109 days


#3 posted 10-14-2019 11:10 PM

Best use of a CNC I have seen yet. Pretty cool.

Go Bucks!!!!!!

-- Think safe, be safe

View Grant Davis's profile

Grant Davis

811 posts in 4444 days


#4 posted 10-15-2019 11:09 AM



Best use of a CNC I have seen yet. Pretty cool.

Go Bucks!!!!!!

- therealSteveN

Thanks Steve

-- Grant...."GO BUCKEYES"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com