LumberJocks

Throw away push stick

  • Advertise with us
Project by Upgrayedd posted 10-08-2019 09:21 PM 1021 views 1 time favorited 5 comments Add to Favorites Watch

Just glue a little piece of trim or scrap to the back and it will be a great push stick.

Hope this helps someone. It is a great 5 minute tool to use in your shop.

-- Upgrayedd - spelled thusly, with two Ds, for a double dose of this pimping.





5 comments so far

View NotaJock's profile

NotaJock

178 posts in 1906 days


#1 posted 10-09-2019 12:15 AM

Sorry but that’s not at all clear to me.
Does the pic have something glued to the back?
Perhaps one more pic with a different colored scrap glued where you are suggesting?

-- Mike in SoCal, now East Texas

View Upgrayedd's profile

Upgrayedd

129 posts in 1989 days


#2 posted 10-09-2019 12:41 AM

It’s right there!!! don’t freaking nail it unless you hate table saw blades! In which case find another way to abuse them! Run this thing through the saw on thin cuts wide cuts, what ever you wish. If you chew it up through the blade they are easily replaceable.

-- Upgrayedd - spelled thusly, with two Ds, for a double dose of this pimping.

View Upgrayedd's profile

Upgrayedd

129 posts in 1989 days


#3 posted 10-09-2019 12:45 AM

A better color contrast.

-- Upgrayedd - spelled thusly, with two Ds, for a double dose of this pimping.

View mel52's profile

mel52

1526 posts in 1071 days


#4 posted 10-09-2019 02:26 AM

This is a useful design. I do something like this with 2X4 scraps. Thanks for showing. Mel

-- MEL, Kansas

View NotaJock's profile

NotaJock

178 posts in 1906 days


#5 posted 11-03-2019 02:15 AM

OK, got it. Thanks.
Mike

-- Mike in SoCal, now East Texas

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com