LumberJocks Woodworking Forum banner

Project Information

I made a cabinet from Baltic Birch to hold my SawStop JobSite saw. It was always my intent to eventually go to a cabinet, and I probably should have just bought one of the bigger saws, but that isn't how it worked out. I bought an Incra table saw fence many years ago from member Loren, and finally put it to use on this cabinet. I also welded up a structure to hold the fence, and aligned it to the saw. I can cut a piece of wood and have it within .001" from one end to the other, for the distance I will ever use (about 2 feet). This freed up enough floor space in my minuscule "shop" space that I could almost get the entire structure in the picture with my cell phone. First project off this setup forthcoming.

Gallery

Comments

· Registered
Joined
·
7,457 Posts
Efficient use of space, good job. I like the mobility of it!
 

· Registered
Joined
·
928 Posts
Very nice, Looks like something I built some years back…..
 

· Registered
Joined
·
3,558 Posts
Thanks! I made it from new plywood, I didn't steal it, honest! :D
 
Top