LumberJocks

Homemade Cap Iron Screwdriver 5

  • Advertise with us
Project by Alask posted 08-17-2019 12:40 AM 498 views 0 times favorited 4 comments Add to Favorites Watch
Homemade Cap Iron Screwdriver 5
Homemade Cap Iron Screwdriver 5 No picture No picture No picture No picture No picture
Zoom Pictures

Hello fellows,at this time one more screwdriver for use at handplanes cap iron screw.Another friend ask me to do one more.
At this one I decided to add some charm with a curved groove.I have a Mortise Pal and I used it for make a groove in a precise and quickly way.

See the pictures below.

The idea of shape started here.

I choose a Brazilian good quality wood.First I did the groove before to cut circular final shape.




I don’t have a lathe and I was thinking in make the round groove using a small router e a round bit.
I make this recess using a Forstener bit for starts the cut from here.But I thought this cut unsafe and gave up.


I choose these tools to make the round groove.

At back to suport I used a shelf pin (5mm) like this

After a rough cut using a microplane rasp I made one pass using the cylinder burr rasp/bit and after used a pencil for find possible high spots (remember a round cut from hole saw is not 100% perfect round).I rasped high spots before a new pass.The back pin supports the piece.
I


Remember do not go so far.The blades I made using a stainless steel 1 1/4”x1/8” flat bar.Iglued the blades with epoxy glue.


Thanks for attention!





4 comments so far

View mel52's profile

mel52

1040 posts in 779 days


#1 posted 08-17-2019 04:25 AM

Looks like it is designed to really put some serious force out if needed. Good job !!! Mel

-- MEL, Kansas

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com