LumberJocks

Another bible box

  • Advertise with us
Project by Bob Kassmeyer posted 08-14-2019 11:28 PM 209 views 0 times favorited 4 comments Add to Favorites Watch

Made this for a friends son after graduation. Wood is quartersawn red oak. The lid has a curve in it, started with a bevel on all edges and finished off with a hand plane and sanding. The finish is many coats of brush on gloss lacquer, rubbed to a satin sheen.

-- Bob Kassmeyer, Nebraska





4 comments so far

View BB1's profile

BB1

1407 posts in 1295 days


#1 posted 08-15-2019 01:31 AM

Very nice gift. How did you inlay the cross on the lid?

View Michael's profile

Michael

4 posts in 1164 days


#2 posted 08-15-2019 01:36 AM

very nice

View CFrye's profile

CFrye

10722 posts in 2287 days


#3 posted 08-15-2019 07:49 AM

Simply elegant box, Bob! Is the cross one piece? The half blind dovetails showing on the front is a beautiful detail. Thanks for sharing.

-- God bless, Candy

View Bob Kassmeyer's profile

Bob Kassmeyer

251 posts in 3372 days


#4 posted 08-15-2019 11:30 AM

BB1, Candy, I cut the cross out in one solid piece about 1/4 inch thick. I used a marking knife to scribe it onto the top and then removed most of the waste with a router and then cleaned it up with a chisel. Thanks for looking and commenting.

-- Bob Kassmeyer, Nebraska

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com