LumberJocks

Sewing Cabinet

  • Advertise with us
Project by socrbent posted 07-18-2019 03:39 PM 351 views 1 time favorited 1 comment Add to Favorites Watch

We wanted to replace the plastic table that my wife was using for her sewing machine and include plenty of storage. The result is this sewing cabinet with 9 large drawers of various depths. Made from maple for the drawer fronts and edging the cabinet grade maple plywood used for top and base unit sides. Drawers sides are poplar. Padauk was used for accents on top edges and center drawer. Used General Finishes Pre-Stain Wood Conditioner and GF Candelite Oil Stain, then finished with 3 coats of GF Arm-R-Seal Urethane.

This photo shows the corner braces used for top and bottom of base units along with the maple edging on plywood

Used a Leigh dove tail jig for all drawer carcasses. Drawers are mounted via soft close slides. Installed slides to drawer sides first. Then with a base unit upside down and spacers for between drawers, mounted slides to base sides.

This is one of several jigs created on this project. This one was to locate drawer pulls.

-- socrbent Ohio





1 comment so far

View Jim Jakosh's profile

Jim Jakosh

23002 posts in 3558 days


#1 posted 07-18-2019 08:38 PM

That is a great sewing table. Lots of room for the work, too. Ten jumps over a plastic table!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com