A standing small sculpted piece

  • Advertise with us
Project by Greg the Cajun Wood Artist posted 07-10-2019 12:40 AM 633 views 0 times favorited 2 comments Add to Favorites Watch
A standing small sculpted piece
A standing small sculpted piece No picture No picture No picture No picture No picture
Zoom Pictures

I had a 4 ft piece of cypress that has been sitting in the barn for quite a while and finally decided I had to use it for something other than gathering dust.
This is what I came up with while playing around. I used about 30” for the sculpting and after cutting off a bad end I used the rest for the base. It has 2 visual sides so that whoever buys it can view whatever side they prefer.
The entire project went quite fast and only took a few hours. The finishing (lacquer) and sanding in between coats actually took longer than the creative part.

-- Wood for projects is like a good Fart..."better when you cut it yourself" Don't take yourself so seriously. No one else does

2 comments so far

View metolius's profile (online now)


386 posts in 1807 days

#1 posted 07-10-2019 11:11 PM

Its intriguing to think of how you may have contained the fractal burns.
I like this very much.

-- derek / oregon

View swirt's profile


6181 posts in 4048 days

#2 posted 07-11-2019 01:29 AM

Quite a clever use of light and dark, smooth and rough.

-- Galootish log blog,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics