LumberJocks

Bandsaw Outfeed Table

  • Advertise with us
Project by bondogaposis posted 06-22-2019 03:42 AM 946 views 4 times favorited 11 comments Add to Favorites Watch

I have been cutting some long pieces on my bandsaw and I got tired of trying to balance them on the little stock table, so I added an outfeed table. Just some scraps from around the shop and I put some plastic laminate on it. It bolts to the table on one side and has an adjustable leg on the other side so I can level it. Thanks for looking.

-- Bondo Gaposis





11 comments so far

View Dave Polaschek's profile

Dave Polaschek

4043 posts in 1034 days


#1 posted 06-22-2019 10:42 AM

Looks like a good solution to the problem. Well done!

-- Dave - Minneapolis

View splintergroup's profile

splintergroup

2779 posts in 1675 days


#2 posted 06-22-2019 01:50 PM

I’ve never seen a BS with sufficient out feed space, great addition with lots of utility!

View GR8HUNTER's profile

GR8HUNTER

6342 posts in 1165 days


#3 posted 06-22-2019 02:05 PM

super nice table GREAT JOB :<))))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View sras's profile

sras

5135 posts in 3581 days


#4 posted 06-22-2019 02:38 PM

Hmmm, I might have a new project to add to the list…

-- Steve - Impatience is Expensive

View therealSteveN's profile

therealSteveN

3378 posts in 1026 days


#5 posted 06-22-2019 04:41 PM

FIXT, next problem..

Nice job bondo.

-- Think safe, be safe

View BurlyBob's profile

BurlyBob

6384 posts in 2718 days


#6 posted 06-22-2019 05:08 PM

That is a dandy idea.

View bushmaster's profile

bushmaster

3671 posts in 2735 days


#7 posted 06-23-2019 01:02 AM

Many time I wished I had such a table too, after struggling with a long piece, one always thinks next time I will have a support.

-- Brian - Hazelton, British Columbia

View swirt's profile

swirt

4070 posts in 3424 days


#8 posted 06-23-2019 02:20 AM

Very handy. I like how it spans the shop vac. Also being adjustable you could probably use it as an extension on anything (drill press, table saw, router table…)

-- Galootish log blog, http://www.timberframe-tools.com

View David's profile

David

211 posts in 4167 days


#9 posted 06-23-2019 03:17 AM

Will it tilt with th table on the BS ?

-- [email protected]

View bondogaposis's profile

bondogaposis

5492 posts in 2803 days


#10 posted 06-23-2019 02:47 PM



Will it tilt with th table on the BS ?

- David


No, it won’t. I can’t remember the last time I tilted the table. But if I had to, it is easy to remove with 2 bolts. The leg to table connection is a hinge so the whole thing will fold up and I can just lean on the wall out of the way if I want to take it off.

-- Bondo Gaposis

View blackcherry's profile

blackcherry

3343 posts in 4275 days


#11 posted 07-14-2019 02:20 AM

Nicely engineer my friend,especially the convenience of folding away.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com